GeoTIFF of 5x5 m Relative Reflectivity for Salt River Bay, St. Croix, 2011, UTM 20N NAD83

This image represents a LiDAR (Light Detection & Ranging) 5x5 meter resolution relative seafloor reflectivity surface for an area surrounding the mouth of Salt River Bay (SARI), St. Croix in the U.S. Virgin Islands (USVI). The image's horizontal coordinate system is NAD83 UTM 20 North. Fugro LADS, in collaboration with NOAA's NOS/NCCOS/CCMA Biogeography Branch, the University of New Hampshire and the National Park Service, acquired bathymetry, relative seafloor reflectivity and hyperspectral imagery in St. Croix from 2/21 to 2/22/2011. Hyperspectral data were acquired using a Hyspex VNIR-1600 sensor. Bathymetry and reflectivity data were acquired using a LADS (Laser Airborne Depth Sounder) Mark II Airborne System from altitudes between 1,200 and 2,200ft at ground speeds between 140 and 175 knots. The 900 Hertz Nd: YAG (neodymium-doped yttrium aluminum garnet) laser (1064 nm) acquired 5x5 meter spot spacing and 200% seabed coverage. In total, 1.62 square kilometers of LiDAR relectivity were collected between 0 m and 34 m in depth. Environmental factors such as wind strength and direction, cloud cover, water clarity and depth influenced the area of data acquisition on a daily basis. The data was processed using the LADS Mark II Ground System and data visualization, quality control and final products were created using CARIS HIPS and SIPS and CARIS BASE Editor. All users should individually evaluate the suitability of this data according to their own needs and standards.

This LiDAR collection is an important effort in an ongoing NOAA scientific research mission in the US Caribbean to characterize nearshore to deep water coral reef habitats at depths down to 1,000 meters. The mission purpose is to better understand the resources within the surveyed reef habitats, and ultimately develop species utilization models linking physical habitats with biological information. The acquired bathymetry, relative seafloor reflectivity, and hyperspectral imagery will be used internally to characterize sea floor topography and to create benthic habitat maps, helping NOAA meet its mapping commitment to the US Coral Reef Task Force. The resulting publicly-distributed data is also a contribution to the greater scientific community interested in the USVI seafloor.

800

These data were prepared by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, make any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed in this report, or represents that its use would not infringe privately owned rights. Reference therein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. Any views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. Although all data have been used by NOAA, no warranty, expressed or implied, is made by NOAA as to the accuracy of the data and/or related materials. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by NOAA in the use of these data or related materials.

Please cite any use of this data.

Note: NOT TO BE USED FOR NAVIGATION. These data were prepared by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, make any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed in this report, or represents that its use would not infringe privately owned rights. Reference therein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. Any views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. Although all data have been used by NOAA, no warranty, expressed or implied, is made by NOAA as to the accuracy of the data and/or related materials. The act of distribution shall not constitute any such warranty, and no responsibility is assumed by NOAA in the use of these data or related materials.

Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 3; ESRI ArcCatalog 9.3.1.4000

None.

None.

This GeoTIFF is sourced from a gridded dataset. The original full-resolution Lidar data was used to create a downsampled uniform-resolution surface in CARIS.

All users should independently analyze the dataset according to their own needs and standards to determine data usability.