2013 USACE ERDC Lidar: Echo Valley Training Center (EVTC), WV

This project was delivered to the Office for Coastal Management for use and dissemination on the Digital Coast. These files contain classified topographic lidar data as unclassified valid topographic data (1), and valid topographic data classified as ground (2). Classes 1 and 2 are defined in accordance with the American Society for Photogrammetry and Remote Sensing (ASPRS) classification standards. These data were collected by the Coastal Zone Mapping and Imaging Lidar (CZMIL) system. CZMIL integrates a lidar sensor with topographic and bathymetric capabilities, a digital camera and a hyperspectral imager on a single remote sensing platform for use in coastal mapping and charting activities. Native lidar data is not generally in a format accessible to most Geographic Information Systems (GIS). Specialized USACE and commercial software packages are used to process the native lidar data into 3-dimensional positions that can be imported into GIS software for visualization and further analysis.

This data was provided to the NOAA Office for Coastal Management (OCM) for data distribution from the Data Access Viewer (DAV) and https. In addition to these lidar point data, the bare earth Digital Elevation Models (DEM) created from the lidar point data are also available. These data are available for custom download at the link provided in the URL section of this metadata record.

These data were collected on behalf of the USACE Engineer Research and Development Center (ERDC) to depict the elevations above the water in Hampshire County in West Virginia.

10838

A footprint of this data set may be viewed in Google Earth at:

https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/3668/supplemental/wv2013_usace_erdc_evtc_m3668.kmz

LiDAR points in LAZ format (Classes 1,2)

none

Any conclusions drawn from the analysis of this information are not the responsibility of USACE, JALBTCX, NOAA, the Office for Coastal Management or its partners.

This data can be obtained on-line at the following URL:

https://coast.noaa.gov/dataviewer/#/lidar/search/where:ID=3668;

None

These data depict the heights at the time of the survey and are only accurate for that time. Acknowledgement of the Joint Airborne Lidar Bathymetry Technical Center of eXpertise (JALBTCX) would be appreciated in any publications or derived products. The data herein, including but not limited to geographic data, tabular data, analytical data, electronic data structures or files, are provided as is without warranty of any kind, either expressed or implied, or statutory, including, but not limited to, the implied warranties or merchantability and fitness for a particular purpose. The entire risk as to the quality and performance of the data is assumed by the user. No guarantee of accuracy is granted, nor is any responsibility for reliance thereon assumed. In no event shall the U.S. Army Corps of Engineers, Mobile District Office, Spatial Data Branch be liable for direct, indirect, incidental, consequential or special damages of any kind, including, but not limited to, loss of anticipated profits or benefits arising out of use of or reliance on the data. The Spatial Data Branch does not accept liability for any damages or misrepresentation caused by inaccuracies in the data or as a result of changes to the data caused by system transfers or other transformations or conversions, nor is there responsibility assumed to maintain the data in any manner or form.

Topo data - Compiled to meet 1 m @ 95% confidence level. Bathy data - compiled to meet 3.5 + 0.05*d meters @ 95% confidence level (d is depth).

Topo data - 19.6 cm @ 95% confidence level (10 cm RMSE). Bathy shallow FOV data - SQRT((0.25^2)+((0.0075d)^2)) meters at @ 95% confidence level. Bathy deep FOV data - SQRT((0.30^2)+((0.013d)^2)) meters @ 95% confidence level (d is depth).

This data set covers the spatial extent of topographic lidar data obtained during this survey.

During inspection and QC of the lidar point cloud, flightline to flightline elevation differences met the CZMIL sensor specifications.

The USACE collected, processed, and provided the data to the NOAA Office for Coastal Management (OCM). OCM received the data and processed it to be available for custom download from the Data Access Viewer (DAV) and for bulk download from https.