Northwest Atlantic Dogfish Persistent Organic Pollutants (POPs)
Entity (ENT) | Northwest Fisheries Science Center (NWFSC)GUID: gov.noaa.nmfs.inport:36246 | Updated: August 9, 2022 | Published / External
Data Attributes
Attribute Summary
|
|
Name | Type | Description |
|---|---|---|---|---|
|
100
|
SampleNumber | VARCHAR2 | Laboratory ID. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). | |
|
100
|
SetName | VARCHAR2 | Batch ID. The Batch ID matches laboratory IDs with their related QA samples; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). | |
|
100
|
SampleType | VARCHAR2 | Tissue or QA sample type. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). | |
|
100
|
replicate | VARCHAR2 | Laboratory replicate. Chemical name Laboratory replicates only, not instrument replicates (e.g., stable isotopes); References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). | |
|
100
|
Animal ID | VARCHAR2 | Field ID from provider. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). | |
|
100
|
Species | VARCHAR2 | Species from provider. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). | |
|
100
|
Site | VARCHAR2 | Site name from provider. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). | |
|
100
|
Latitude | NUMBER | Latidude (decimal). References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are decimal degrees. | |
|
100
|
Longitude | NUMBER | Longitude (decimal). References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are decimal degrees. | |
|
100
|
LatLongQual | VARCHAR2 | Quality of lat/long position. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). | |
|
100
|
Sex | VARCHAR2 | Animal sex. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). | |
|
100
|
Section | VARCHAR2 | Position on animal where sample was collected. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). | |
|
100
|
Specimen | VARCHAR2 | Specimen information or additional field info. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). | |
|
100
|
Treatment Group | VARCHAR2 | Sample treatement identifier. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). | |
|
100
|
Collection Date | DATE | Date of sample collection. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). | |
|
100
|
SampleWt | NUMBER | Mass (or volume, for liquids) of sample used for analysis. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are g (or mL). | |
|
100
|
CalcBasis | VARCHAR2 | Wet or dry mass used for analyte calculation. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). | |
|
100
|
Lipid format | VARCHAR2 | Total lipid %. Chemical name Total lipid (total extractables) by gravimetric determination, 100*g lipid/g sample; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are %. | |
|
100
|
LipidIatro_SALE format | VARCHAR2 | Lipid class, % of total lipid. Chemical name stearic acid lauryl esters (wax and sterol esters) (% of total lipid); References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are %. | |
|
100
|
LipidIatro_TG format | VARCHAR2 | Lipid class, % of total lipid. Chemical name triglycerides (% of total lipid); References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are %. | |
|
100
|
LipidIatro_FFA format | VARCHAR2 | Lipid class, % of total lipid. Chemical name Free fatty acids (% of total lipid); References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are %. | |
|
100
|
LipidIatro_Chol format | VARCHAR2 | Lipid class, % of total lipid. Chemical name Cholesterol (% of total lipid); References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are %. | |
|
100
|
LipidIatro_PL format | VARCHAR2 | Lipid class, % of total lipid. Chemical name Phosphilipids (% of total lipid); References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are %. | |
|
100
|
CB103 Recovery Format | VARCHAR2 | Recovery of surrogate standard. POP; surrogate standard; chemical name 2,2,4,5,6-pentachlorobiphenyl; Chemical Abstract Service number: 60145-21-3; reference compound: n/a; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are %. | |
|
100
|
DOB Recovery Format | VARCHAR2 | Recovery of surrogate standard. POP; surrogate standard (alternate); chemical name 4,4-dibromooctafluorobiphenyl; Chemical Abstract Service number: 10386-84-2; reference compound: n/a; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are %. | |
|
100
|
HCB Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name hexachlorobenzene; Chemical Abstract Service number: 118-74-1; surrogate standard: CB103; reference compound: HCB; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
aHCH Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name alpha-HCH, (1a,2a,3,4a,5,6)-1,2,3,4,5,6-hexachlorocyclohexane; Chemical Abstract Service number: 319-84-6; surrogate standard: CB103; reference compound: aHCH; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
bHCH Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name beta-HCH, (1a,2,3a,4,5a,6)-1,2,3,4,5,6-hexachlorocyclohexane; Chemical Abstract Service number: 319-85-7; surrogate standard: CB103; reference compound: bHCH; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
lindane Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name lindane (g-BHC, gamma-HCH), (1a,2a,3,4a,5a,6)-1,2,3,4,5,6-hexachlorocyclohexane; Chemical Abstract Service number: 58-89-9; surrogate standard: CB103; reference compound: gHCH; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
achlor Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name alpha-chlordane, cis-chlordane, 1,2,4,5,6,7,8,8-octachloro-2,3,3a,4,7,7a-hexahydro-4,7-methano-1H-indene; Chemical Abstract Service number: 5103-71-9; surrogate standard: CB103; reference compound: achlor; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cnona Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name cis-nonachlor, 1,2,3,4,5,67,8,8-nonachloro-2,3,3a,4,7,7a-hexahyrdo-4,7-methano-1H-indene; Chemical Abstract Service number: 5103-73-1; surrogate standard: CB103; reference compound: cisnona; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
bchlor Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name beta-chlordane, trans-chlordane, 1,2,4,5,6,7,8,8-octachloro-2,3,3a,4,7,7a-hexahydro-4,7-methano-1H-indene; Chemical Abstract Service number: 5103-74-2; surrogate standard: CB103; reference compound: gchlor; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
hept Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name heptachlor, 1,4,5,6,7,8,8-heptachloro-3a,4,7,7a-tetrahydro-4,7-methano-1H-indene; Chemical Abstract Service number: 76-44-8; surrogate standard: CB103; reference compound: hept; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
HPE Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name heptachlor epoxide (isomer B); Chemical Abstract Service number: 1024-57-3; surrogate standard: CB103; reference compound: HPE; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
nona3 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name nonachlor III (aka MC 6, presumably 1-exo,2,2,4,5,6,7,8,8-octachloro-3a,4,7,7a-tetrahydro-4,7-methanoindane); surrogate standard: CB103; reference compound: tnona; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
oxychlor Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 1,2,4,5,6,7,8,8-octachloro-2,3-epoxy-3a,4,7,7a-tetrahydro-4,7-methanoindan; Chemical Abstract Service number: 27304-13-8; surrogate standard: CB103; reference compound: oxychlor; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
tnona Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name trans-nonachlor; Chemical Abstract Service number: 39765-80-5; surrogate standard: CB103; reference compound: tnona; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
aldrin Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name aldrin, 1,2,3,4,10,10-hexachloro-1,4,4a,5,8,8a-hexahydro-1,4:5,8-dimethanonaphthalene; Chemical Abstract Service number: 309-00-2; surrogate standard: CB103; reference compound: aldrin; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
diel Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name dieldrin, 2,7:3,6-dimethanonaphth[2,3-b]oxirene; Chemical Abstract Service number: 60-57-1; surrogate standard: CB103; reference compound: dieldrin; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
mirex Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name mirex, dodecachlorooctahydro-1,3,4-metheno-2H-cyclobuta[cd]pentalene; Chemical Abstract Service number: 2385-85-5; surrogate standard: CB103; reference compound: mirex; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
eslf1 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name endosulfan I, 6,7,8,9,10,10-hexachloro-1,5,5a,6,9,9a-hexahydro-6,9-Methano-2,4,3-benzodioxathiepin; Chemical Abstract Service number: 959-98-8; surrogate standard: CB103; reference compound: eslfi; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb17 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,4-trichlorobiphenyl; Chemical Abstract Service number: 37680-66-3; surrogate standard: CB103; reference compound: cb17; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb18 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,5-trichlorobiphenyl; Chemical Abstract Service number: 37680-65-2; surrogate standard: CB103; reference compound: cb18; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb28 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,4,4-trichlorobiphenyl; Chemical Abstract Service number: 7012-37-5; surrogate standard: CB103; reference compound: cb28; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb31 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,4,5-trichlorobiphenyl; Chemical Abstract Service number: 16606-02-3; surrogate standard: CB103; reference compound: cb31; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb33 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,3,4-trichlorobiphenyl; Chemical Abstract Service number: 38444-86-9; surrogate standard: CB103; reference compound: cb33; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb44 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,3,5-tetrachlorobiphenyl; Chemical Abstract Service number: 41464-39-5; surrogate standard: CB103; reference compound: cb44; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb49 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,4,5-tetrachlorobiphenyl; Chemical Abstract Service number: 41464-40-8; surrogate standard: CB103; reference compound: cb49; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb52 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,5,5-tetrachlorobiphenyl; Chemical Abstract Service number: 35693-99-3; surrogate standard: CB103; reference compound: cb52; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb66 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,3,4,4-tetrachlorobiphenyl; Chemical Abstract Service number: 32598-10-0; surrogate standard: CB103; reference compound: cb66; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb70 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,3,4,5-tetrachlorobiphenyl; Chemical Abstract Service number: 32598-11-1; surrogate standard: CB103; reference compound: cb70; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb74 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,4,4,5-tetrachlorobiphenyl; Chemical Abstract Service number: 32690-93-0; surrogate standard: CB103; reference compound: cb74; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb82 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,3,3,4-pentachlorobiphenyl; Chemical Abstract Service number: 52663-62-4; surrogate standard: CB103; reference compound: cb82; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb87 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,3,4,5-pentachlorobiphenyl; Chemical Abstract Service number: 38380-02-8; surrogate standard: CB103; reference compound: cb87; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb95 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,3,5,6-pentachlorobiphenyl; Chemical Abstract Service number: 38379-99-6; surrogate standard: CB103; reference compound: cb95; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb99 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,3,4,4,5-pentachlorobiphenyl; Chemical Abstract Service number: 38380-01-7; surrogate standard: CB103; reference compound: cb99; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb101 Conc Format | VARCHAR2 | Analyte concentration. POP; Colelutes with cb90, CAS number 68194-07-0; chemical name 2,2,4,5,5-pentachlorobiphenyl; Chemical Abstract Service number: 37680-73-2; surrogate standard: CB103; reference compound: cb101; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb105 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,3,3,4,4-pentachlorobiphenyl; Chemical Abstract Service number: 32598-14-4; surrogate standard: CB103; reference compound: cb105; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb110 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,3,3,4,6-pentachlorobiphenyl; Chemical Abstract Service number: 38380-03-9; surrogate standard: CB103; reference compound: cb110; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb118 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,3,4,4,5-pentachlorobiphenyl; Chemical Abstract Service number: 31508-00-6; surrogate standard: CB103; reference compound: cb118; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb128 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,3,3,4,4-hexachlorobiphenyl; Chemical Abstract Service number: 38380-07-3; surrogate standard: CB103; reference compound: cb128; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb138 Conc Format | VARCHAR2 | Analyte concentration. POP; Colelutes with cb163 (CAS number 74472-44-9) and cb164 (CAS number 74472-45-0); chemical name 2,2,3,4,4,5-hexachlorobiphenyl; Chemical Abstract Service number: 35065-28-2; surrogate standard: CB103; reference compound: cb138; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb149 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,3,4,5,6-hexachlorobiphenyl; Chemical Abstract Service number: 38380-04-0; surrogate standard: CB103; reference compound: cb149; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb151 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,3,5,5, 6-hexachlorobiphenyl; Chemical Abstract Service number: 52663-63-5; surrogate standard: CB103; reference compound: cb151; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb153 Conc Format | VARCHAR2 | Analyte concentration. POP; Colelutes with cb132, CAS number 38380-05-1; chemical name 2,2,4,4,5,5-hexachlorobiphenyl; Chemical Abstract Service number: 35065-27-1; surrogate standard: CB103; reference compound: cb153 + cb132; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb156 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,3,3,4,4,5-hexachlorobiphenyl; Chemical Abstract Service number: 38380-08-4; surrogate standard: CB103; reference compound: cb156; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb158 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,3,3,4,4,6-hexachlorobiphenyl; Chemical Abstract Service number: 74472-42-7; surrogate standard: CB103; reference compound: cb158; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb170 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,3,3,4,4,5-heptachlorobiphenyl; Chemical Abstract Service number: 35065-30-6; surrogate standard: CB103; reference compound: cb170; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb171 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,3,3,4,4,6-heptachlorobiphenyl; Chemical Abstract Service number: 52663-71-5; surrogate standard: CB103; reference compound: cb171; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb177 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,3,3,4,5,6-heptachlorobiphenyl; Chemical Abstract Service number: 52663-70-4; surrogate standard: CB103; reference compound: cb177; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb180 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,3,4,4,5,5-heptachlorobiphenyl; Chemical Abstract Service number: 35065-29-3; surrogate standard: CB103; reference compound: cb180; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb183 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,3,4,4,5,6-heptachlorobiphenyl; Chemical Abstract Service number: 52663-69-1; surrogate standard: CB103; reference compound: cb183; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb187 Conc Format | VARCHAR2 | Analyte concentration. POP; Colelutes with cb159 (CAS number 39635-35-3) and cb182 (CAS number60145-23-5 ); chemical name 2,2,3,4,5,5,6-heptachlorobiphenyl; Chemical Abstract Service number: 52663-68-0; surrogate standard: CB103; reference compound: cb187; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb191 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,3,3,4,4,5,6-heptachlorobiphenyl; Chemical Abstract Service number: 74472-50-7; surrogate standard: CB103; reference compound: cb191; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb194 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,3,3,4,4,5,5-octachlorobiphenyl; Chemical Abstract Service number: 35694-08-7; surrogate standard: CB103; reference compound: cb194; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb195 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,3,3,4,4,5,6-octachlorobiphenyl; Chemical Abstract Service number: 52663-78-2; surrogate standard: CB103; reference compound: cb195; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb199 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,3,3,4,5,5,6-octachlorobiphenyl; Chemical Abstract Service number: 52663-75-9; surrogate standard: CB103; reference compound: cb199; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb205 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,3,3,4,4,5,5,6-octachlorobiphenyl; Chemical Abstract Service number: 74472-53-0; surrogate standard: CB103; reference compound: cb205; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb206 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,3,3,4,4,5,5,6-nonachlorobiphenyl; Chemical Abstract Service number: 40186-72-9; surrogate standard: CB103; reference compound: cb206; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb208 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,3,3,4,5,5,6,6-nonachlorobiphenyl; Chemical Abstract Service number: 52663-77-1; surrogate standard: CB103; reference compound: cb208; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
cb209 Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name decachlorobiphenyl; Chemical Abstract Service number: 2051-24-3; surrogate standard: CB103; reference compound: cb209; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
opDDD Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name o,p-DDD, 1,1-dichloro-2-(o-chlorophenyl)-2-(p-chlorophenyl)-ethane; Chemical Abstract Service number: 53-19-0; surrogate standard: CB103; reference compound: opddd; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
opdde Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name o,p-DDE, 1,1-dichloro-2-(o-chlorophenyl)-2-(p-chlorophenyl)-ethylene; Chemical Abstract Service number: 3424-82-6; surrogate standard: CB103; reference compound: opdde; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
opDDT Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name o,p-DDT, 1,1,1-trichloro-2-(o-chlorophenyl)-2-(p-chlorophenyl)-ethane; Chemical Abstract Service number: 789-02-6; surrogate standard: CB103; reference compound: opddt; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
ppDDD Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name p,p-DDD, 1,1-dichloro-2,2-bis(p-chlorophenyl)-ethane; Chemical Abstract Service number: 72-54-8; surrogate standard: CB103; reference compound: ppddd; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
ppDDE Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name p,p-DDE, 1,1-dichloro-2,2-bis(p-chlorophenyl)-ethylene; Chemical Abstract Service number: 72-55-9; surrogate standard: CB103; reference compound: ppdde; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
ppDDT Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name p,p-DDT, 1,1,1-trichloro-2,2-bis(p-chlorophenyl)-ethane; Chemical Abstract Service number: 50-29-3; surrogate standard: CB103; reference compound: ppddt; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
Sum CHLDs Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name Sum CHLDs is the sum of a-chlordane, cis-nonachlor, g-chlordane, heptachlor, heptachlor epoxide, nonachlor III (a chlordane metabolite that we do not have a CAS number for, presumed to be 1-exo,2,2,4,5,6,7,8,8-octachloro-3a,4,7,7a-tetrahydro-4,7-methanoindane), oxychlordane, and trans-nonachlor. ; surrogate standard: CB103; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
Sum DDTs Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name Sum DDTs is the sum of opDDD, opDDE, opDDT, ppDDD, ppDDE, and ppDDT. ; surrogate standard: CB103; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
Sum HCHs Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name Sum HCHs is the sum of aHCH, bHCH and lindane (gHCH). ; surrogate standard: CB103; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
Sum40CBs Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name Sum40CBs is the sum of the 40 chlorobiphenyl congeners listed above (plus their coelutors); surrogate standard: CB103; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
Sum6CBs Conc Format | VARCHAR2 | Analyte concentration. POP; chemical name Sum6CBs is the sum of the concentrations of chlorobiphenyl congeners cb28, cb52, cb101, cb153, cb138, and cb180 (EU regulatory sum for seafood safety); surrogate standard: CB103; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
BDE28 conc format | VARCHAR2 | Analyte concentration. POP; chemical name 2,4,4-tribromodiphenyl ether; Chemical Abstract Service number: 41318-75-6; surrogate standard: CB103; reference compound: bde28; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
BDE47 conc format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,4,4-tetrabromodiphenyl ether; Chemical Abstract Service number: 5436-43-1; surrogate standard: CB103; reference compound: bde47; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
BDE49 conc format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,4,5-tetrabromodiphenyl ether; Chemical Abstract Service number: 243982-82-3; surrogate standard: CB103; reference compound: bde49; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
BDE66 conc format | VARCHAR2 | Analyte concentration. POP; chemical name 2,3,4,4-tetrabromodiphenyl ether; Chemical Abstract Service number: 189084-61-5; surrogate standard: CB103; reference compound: bde66; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
BDE85 conc format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,3,4,4-pentabromodiphenyl ether; Chemical Abstract Service number: 182346-21-0; surrogate standard: CB103; reference compound: BDE99; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
BDE99 conc format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,4,4,5-pentabromodiphenyl ether; Chemical Abstract Service number: 60348-60-9; surrogate standard: CB103; reference compound: bde99; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
BDE100 conc format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,4,4,6-pentabromodiphenyl ether; Chemical Abstract Service number: 189084-64-8; surrogate standard: CB103; reference compound: bde100; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
Br5DE04 conc format | VARCHAR2 | Analyte concentration. POP; chemical name Pentabromodiphenyl ether, congener ID unknown.; surrogate standard: CB103; reference compound: BDE99; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
Br5DE05 conc format | VARCHAR2 | Analyte concentration. POP; chemical name Pentabromodiphenyl ether, congener ID unknown.; surrogate standard: CB103; reference compound: BDE99; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
BDE153 conc format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,4,4,5,5-hexabromodiphenyl ether; Chemical Abstract Service number: 68631-49-2; surrogate standard: CB103; reference compound: bde153; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
BDE154 conc format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,4,4,5,6-hexabromodiphenyl ether; Chemical Abstract Service number: 207122-15-4; surrogate standard: CB103; reference compound: bde154; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
Br6DE01 conc format | VARCHAR2 | Analyte concentration. POP; chemical name Hexabromodiphenyl ether, congener ID unknown.; surrogate standard: CB103; reference compound: BDE154; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
BDE155 conc format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,4,4,6,6-hexabromodiphenyl ether; Chemical Abstract Service number: 35854-94-5; surrogate standard: CB103; reference compound: bde155; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
BDE183 conc format | VARCHAR2 | Analyte concentration. POP; chemical name 2,2,3,4,4,5,6-heptabromodiphenyl ether; Chemical Abstract Service number: 207122-16-5; surrogate standard: CB103; reference compound: bde183; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
Br7DE01 conc format | VARCHAR2 | Analyte concentration. POP; chemical name Heptabromodiphenyl ether, congener ID unknown.; surrogate standard: CB103; reference compound: BDE183; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. | |
|
100
|
SumBDE conc format | VARCHAR2 | Analyte concentration. POP; chemical name SumBDEs is the sum of all the individual BDE congeners listed.; surrogate standard: CB103; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
Attribute Details
SampleNumber
| Seq. Order: | 1 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 12 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Laboratory ID. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). |
| General Data Type: | VARCHAR2 |
| Allowed Values: | assigned in lab |
SetName
| Seq. Order: | 2 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 7 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Batch ID. The Batch ID matches laboratory IDs with their related QA samples; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). |
| General Data Type: | VARCHAR2 |
| Allowed Values: | assigned in lab |
SampleType
| Seq. Order: | 3 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 10 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Tissue or QA sample type. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). |
| General Data Type: | VARCHAR2 |
| Allowed Values: | from list |
replicate
| Seq. Order: | 4 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 9 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Laboratory replicate. Chemical name Laboratory replicates only, not instrument replicates (e.g., stable isotopes); References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). |
| General Data Type: | VARCHAR2 |
| Allowed Values: | from list (e.g. original, duplicate, triplicate, etc.) |
Animal ID
| Seq. Order: | 5 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 9 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Field ID from provider. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). |
| General Data Type: | VARCHAR2 |
| Allowed Values: | as provided - this means that we do not have means to QA/QC data |
Species
| Seq. Order: | 6 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 7 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Species from provider. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). |
| General Data Type: | VARCHAR2 |
| Allowed Values: | as provided - this means that we do not have means to QA/QC data |
Site
| Seq. Order: | 7 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 4 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Site name from provider. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). |
| General Data Type: | VARCHAR2 |
| Allowed Values: | as provided - this means that we do not have means to QA/QC data |
Latitude
| Seq. Order: | 8 |
|---|---|
| Data Storage Type: | NUMBER |
| Max Length: | 8 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Latidude (decimal). References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are decimal degrees. |
| General Data Type: | NUMBER |
| Unit of Measure: | decimal degrees |
| Allowed Values: | as provided - this means that we do not have means to QA/QC data |
Longitude
| Seq. Order: | 9 |
|---|---|
| Data Storage Type: | NUMBER |
| Max Length: | 9 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Longitude (decimal). References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are decimal degrees. |
| General Data Type: | NUMBER |
| Unit of Measure: | decimal degrees |
| Allowed Values: | as provided - this means that we do not have means to QA/QC data |
LatLongQual
| Seq. Order: | 10 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 11 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Quality of lat/long position. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). |
| General Data Type: | VARCHAR2 |
| Allowed Values: | from list; as provided - this means that we do not have means to QA/QC data |
Sex
| Seq. Order: | 11 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 3 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Animal sex. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). |
| General Data Type: | VARCHAR2 |
| Allowed Values: | M, F, Unk (from list) - as provided; this means that we do not have means to QA/QC data |
Section
| Seq. Order: | 12 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 7 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Position on animal where sample was collected. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). |
| General Data Type: | VARCHAR2 |
| Allowed Values: | from list, as provided (i.e., dorsal, ventral, etc.); as provided means we do not have means to QA/CC data |
Specimen
| Seq. Order: | 13 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 8 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Specimen information or additional field info. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). |
| General Data Type: | VARCHAR2 |
| Allowed Values: | as provided, or, comma separated list of specimens making up a composite |
Treatment Group
| Seq. Order: | 14 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 15 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Sample treatement identifier. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). |
| General Data Type: | VARCHAR2 |
| Allowed Values: | as provided - this means that we do not have means to QA/QC data |
Collection Date
| Seq. Order: | 15 |
|---|---|
| Data Storage Type: | DATE |
| Max Length: | 15 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Date of sample collection. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). |
| General Data Type: | DATE |
| Allowed Values: | as provided - this means that we do not have means to QA/QC data |
SampleWt
| Seq. Order: | 16 |
|---|---|
| Data Storage Type: | NUMBER |
| Max Length: | 8 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Mass (or volume, for liquids) of sample used for analysis. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are g (or mL). |
| General Data Type: | NUMBER |
| Unit of Measure: | g (or mL) |
| Allowed Values: | 0-5g, 0-250mL |
CalcBasis
| Seq. Order: | 17 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 9 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Wet or dry mass used for analyte calculation. References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). |
| General Data Type: | VARCHAR2 |
| Allowed Values: | wet, dry |
Lipid format
| Seq. Order: | 18 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 12 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Total lipid %. Chemical name Total lipid (total extractables) by gravimetric determination, 100*g lipid/g sample; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are %. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | % |
| Allowed Values: | 0-100 |
LipidIatro_SALE format
| Seq. Order: | 19 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 22 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Lipid class, % of total lipid. Chemical name stearic acid lauryl esters (wax and sterol esters) (% of total lipid); References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are %. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | % |
| Allowed Values: | 0-100 |
LipidIatro_TG format
| Seq. Order: | 20 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 20 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Lipid class, % of total lipid. Chemical name triglycerides (% of total lipid); References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are %. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | % |
| Allowed Values: | 0-100 |
LipidIatro_FFA format
| Seq. Order: | 21 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 21 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Lipid class, % of total lipid. Chemical name Free fatty acids (% of total lipid); References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are %. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | % |
| Allowed Values: | 0-100 |
LipidIatro_Chol format
| Seq. Order: | 22 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 22 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Lipid class, % of total lipid. Chemical name Cholesterol (% of total lipid); References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are %. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | % |
| Allowed Values: | 0-100 |
LipidIatro_PL format
| Seq. Order: | 23 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 20 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Lipid class, % of total lipid. Chemical name Phosphilipids (% of total lipid); References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are %. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | % |
| Allowed Values: | 0-100 |
CB103 Recovery Format
| Seq. Order: | 24 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 21 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Recovery of surrogate standard. POP; surrogate standard; chemical name 2,2,4,5,6-pentachlorobiphenyl; Chemical Abstract Service number: 60145-21-3; reference compound: n/a; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are %. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | % |
| Allowed Values: | 60-130 |
DOB Recovery Format
| Seq. Order: | 25 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 19 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Recovery of surrogate standard. POP; surrogate standard (alternate); chemical name 4,4-dibromooctafluorobiphenyl; Chemical Abstract Service number: 10386-84-2; reference compound: n/a; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are %. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | % |
| Allowed Values: | 60-130 |
HCB Conc Format
| Seq. Order: | 26 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 15 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name hexachlorobenzene; Chemical Abstract Service number: 118-74-1; surrogate standard: CB103; reference compound: HCB; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
aHCH Conc Format
| Seq. Order: | 27 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 16 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name alpha-HCH, (1a,2a,3,4a,5,6)-1,2,3,4,5,6-hexachlorocyclohexane; Chemical Abstract Service number: 319-84-6; surrogate standard: CB103; reference compound: aHCH; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
bHCH Conc Format
| Seq. Order: | 28 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 16 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name beta-HCH, (1a,2,3a,4,5a,6)-1,2,3,4,5,6-hexachlorocyclohexane; Chemical Abstract Service number: 319-85-7; surrogate standard: CB103; reference compound: bHCH; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
lindane Conc Format
| Seq. Order: | 29 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 19 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name lindane (g-BHC, gamma-HCH), (1a,2a,3,4a,5a,6)-1,2,3,4,5,6-hexachlorocyclohexane; Chemical Abstract Service number: 58-89-9; surrogate standard: CB103; reference compound: gHCH; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
achlor Conc Format
| Seq. Order: | 30 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 18 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name alpha-chlordane, cis-chlordane, 1,2,4,5,6,7,8,8-octachloro-2,3,3a,4,7,7a-hexahydro-4,7-methano-1H-indene; Chemical Abstract Service number: 5103-71-9; surrogate standard: CB103; reference compound: achlor; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cnona Conc Format
| Seq. Order: | 31 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name cis-nonachlor, 1,2,3,4,5,67,8,8-nonachloro-2,3,3a,4,7,7a-hexahyrdo-4,7-methano-1H-indene; Chemical Abstract Service number: 5103-73-1; surrogate standard: CB103; reference compound: cisnona; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
bchlor Conc Format
| Seq. Order: | 32 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 18 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name beta-chlordane, trans-chlordane, 1,2,4,5,6,7,8,8-octachloro-2,3,3a,4,7,7a-hexahydro-4,7-methano-1H-indene; Chemical Abstract Service number: 5103-74-2; surrogate standard: CB103; reference compound: gchlor; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
hept Conc Format
| Seq. Order: | 33 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 16 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name heptachlor, 1,4,5,6,7,8,8-heptachloro-3a,4,7,7a-tetrahydro-4,7-methano-1H-indene; Chemical Abstract Service number: 76-44-8; surrogate standard: CB103; reference compound: hept; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
HPE Conc Format
| Seq. Order: | 34 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 15 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name heptachlor epoxide (isomer B); Chemical Abstract Service number: 1024-57-3; surrogate standard: CB103; reference compound: HPE; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
nona3 Conc Format
| Seq. Order: | 35 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name nonachlor III (aka MC 6, presumably 1-exo,2,2,4,5,6,7,8,8-octachloro-3a,4,7,7a-tetrahydro-4,7-methanoindane); surrogate standard: CB103; reference compound: tnona; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
oxychlor Conc Format
| Seq. Order: | 36 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 20 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 1,2,4,5,6,7,8,8-octachloro-2,3-epoxy-3a,4,7,7a-tetrahydro-4,7-methanoindan; Chemical Abstract Service number: 27304-13-8; surrogate standard: CB103; reference compound: oxychlor; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
tnona Conc Format
| Seq. Order: | 37 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name trans-nonachlor; Chemical Abstract Service number: 39765-80-5; surrogate standard: CB103; reference compound: tnona; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
aldrin Conc Format
| Seq. Order: | 38 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 18 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name aldrin, 1,2,3,4,10,10-hexachloro-1,4,4a,5,8,8a-hexahydro-1,4:5,8-dimethanonaphthalene; Chemical Abstract Service number: 309-00-2; surrogate standard: CB103; reference compound: aldrin; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
diel Conc Format
| Seq. Order: | 39 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 16 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name dieldrin, 2,7:3,6-dimethanonaphth[2,3-b]oxirene; Chemical Abstract Service number: 60-57-1; surrogate standard: CB103; reference compound: dieldrin; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
mirex Conc Format
| Seq. Order: | 40 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name mirex, dodecachlorooctahydro-1,3,4-metheno-2H-cyclobuta[cd]pentalene; Chemical Abstract Service number: 2385-85-5; surrogate standard: CB103; reference compound: mirex; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
eslf1 Conc Format
| Seq. Order: | 41 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name endosulfan I, 6,7,8,9,10,10-hexachloro-1,5,5a,6,9,9a-hexahydro-6,9-Methano-2,4,3-benzodioxathiepin; Chemical Abstract Service number: 959-98-8; surrogate standard: CB103; reference compound: eslfi; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb17 Conc Format
| Seq. Order: | 42 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 16 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,4-trichlorobiphenyl; Chemical Abstract Service number: 37680-66-3; surrogate standard: CB103; reference compound: cb17; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb18 Conc Format
| Seq. Order: | 43 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 16 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,5-trichlorobiphenyl; Chemical Abstract Service number: 37680-65-2; surrogate standard: CB103; reference compound: cb18; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb28 Conc Format
| Seq. Order: | 44 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 16 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,4,4-trichlorobiphenyl; Chemical Abstract Service number: 7012-37-5; surrogate standard: CB103; reference compound: cb28; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb31 Conc Format
| Seq. Order: | 45 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 16 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,4,5-trichlorobiphenyl; Chemical Abstract Service number: 16606-02-3; surrogate standard: CB103; reference compound: cb31; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb33 Conc Format
| Seq. Order: | 46 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 16 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,3,4-trichlorobiphenyl; Chemical Abstract Service number: 38444-86-9; surrogate standard: CB103; reference compound: cb33; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb44 Conc Format
| Seq. Order: | 47 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 16 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,3,5-tetrachlorobiphenyl; Chemical Abstract Service number: 41464-39-5; surrogate standard: CB103; reference compound: cb44; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb49 Conc Format
| Seq. Order: | 48 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 16 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,4,5-tetrachlorobiphenyl; Chemical Abstract Service number: 41464-40-8; surrogate standard: CB103; reference compound: cb49; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb52 Conc Format
| Seq. Order: | 49 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 16 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,5,5-tetrachlorobiphenyl; Chemical Abstract Service number: 35693-99-3; surrogate standard: CB103; reference compound: cb52; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb66 Conc Format
| Seq. Order: | 50 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 16 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,3,4,4-tetrachlorobiphenyl; Chemical Abstract Service number: 32598-10-0; surrogate standard: CB103; reference compound: cb66; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb70 Conc Format
| Seq. Order: | 51 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 16 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,3,4,5-tetrachlorobiphenyl; Chemical Abstract Service number: 32598-11-1; surrogate standard: CB103; reference compound: cb70; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb74 Conc Format
| Seq. Order: | 52 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 16 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,4,4,5-tetrachlorobiphenyl; Chemical Abstract Service number: 32690-93-0; surrogate standard: CB103; reference compound: cb74; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb82 Conc Format
| Seq. Order: | 53 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 16 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,3,3,4-pentachlorobiphenyl; Chemical Abstract Service number: 52663-62-4; surrogate standard: CB103; reference compound: cb82; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb87 Conc Format
| Seq. Order: | 54 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 16 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,3,4,5-pentachlorobiphenyl; Chemical Abstract Service number: 38380-02-8; surrogate standard: CB103; reference compound: cb87; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb95 Conc Format
| Seq. Order: | 55 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 16 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,3,5,6-pentachlorobiphenyl; Chemical Abstract Service number: 38379-99-6; surrogate standard: CB103; reference compound: cb95; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb99 Conc Format
| Seq. Order: | 56 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 16 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,3,4,4,5-pentachlorobiphenyl; Chemical Abstract Service number: 38380-01-7; surrogate standard: CB103; reference compound: cb99; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb101 Conc Format
| Seq. Order: | 57 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; Colelutes with cb90, CAS number 68194-07-0; chemical name 2,2,4,5,5-pentachlorobiphenyl; Chemical Abstract Service number: 37680-73-2; surrogate standard: CB103; reference compound: cb101; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb105 Conc Format
| Seq. Order: | 58 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,3,3,4,4-pentachlorobiphenyl; Chemical Abstract Service number: 32598-14-4; surrogate standard: CB103; reference compound: cb105; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb110 Conc Format
| Seq. Order: | 59 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,3,3,4,6-pentachlorobiphenyl; Chemical Abstract Service number: 38380-03-9; surrogate standard: CB103; reference compound: cb110; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb118 Conc Format
| Seq. Order: | 60 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,3,4,4,5-pentachlorobiphenyl; Chemical Abstract Service number: 31508-00-6; surrogate standard: CB103; reference compound: cb118; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb128 Conc Format
| Seq. Order: | 61 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,3,3,4,4-hexachlorobiphenyl; Chemical Abstract Service number: 38380-07-3; surrogate standard: CB103; reference compound: cb128; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb138 Conc Format
| Seq. Order: | 62 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; Colelutes with cb163 (CAS number 74472-44-9) and cb164 (CAS number 74472-45-0); chemical name 2,2,3,4,4,5-hexachlorobiphenyl; Chemical Abstract Service number: 35065-28-2; surrogate standard: CB103; reference compound: cb138; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb149 Conc Format
| Seq. Order: | 63 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,3,4,5,6-hexachlorobiphenyl; Chemical Abstract Service number: 38380-04-0; surrogate standard: CB103; reference compound: cb149; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb151 Conc Format
| Seq. Order: | 64 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,3,5,5, 6-hexachlorobiphenyl; Chemical Abstract Service number: 52663-63-5; surrogate standard: CB103; reference compound: cb151; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb153 Conc Format
| Seq. Order: | 65 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; Colelutes with cb132, CAS number 38380-05-1; chemical name 2,2,4,4,5,5-hexachlorobiphenyl; Chemical Abstract Service number: 35065-27-1; surrogate standard: CB103; reference compound: cb153 + cb132; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb156 Conc Format
| Seq. Order: | 66 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,3,3,4,4,5-hexachlorobiphenyl; Chemical Abstract Service number: 38380-08-4; surrogate standard: CB103; reference compound: cb156; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb158 Conc Format
| Seq. Order: | 67 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,3,3,4,4,6-hexachlorobiphenyl; Chemical Abstract Service number: 74472-42-7; surrogate standard: CB103; reference compound: cb158; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb170 Conc Format
| Seq. Order: | 68 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,3,3,4,4,5-heptachlorobiphenyl; Chemical Abstract Service number: 35065-30-6; surrogate standard: CB103; reference compound: cb170; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb171 Conc Format
| Seq. Order: | 69 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,3,3,4,4,6-heptachlorobiphenyl; Chemical Abstract Service number: 52663-71-5; surrogate standard: CB103; reference compound: cb171; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb177 Conc Format
| Seq. Order: | 70 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,3,3,4,5,6-heptachlorobiphenyl; Chemical Abstract Service number: 52663-70-4; surrogate standard: CB103; reference compound: cb177; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb180 Conc Format
| Seq. Order: | 71 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,3,4,4,5,5-heptachlorobiphenyl; Chemical Abstract Service number: 35065-29-3; surrogate standard: CB103; reference compound: cb180; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb183 Conc Format
| Seq. Order: | 72 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,3,4,4,5,6-heptachlorobiphenyl; Chemical Abstract Service number: 52663-69-1; surrogate standard: CB103; reference compound: cb183; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb187 Conc Format
| Seq. Order: | 73 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; Colelutes with cb159 (CAS number 39635-35-3) and cb182 (CAS number60145-23-5 ); chemical name 2,2,3,4,5,5,6-heptachlorobiphenyl; Chemical Abstract Service number: 52663-68-0; surrogate standard: CB103; reference compound: cb187; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb191 Conc Format
| Seq. Order: | 74 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,3,3,4,4,5,6-heptachlorobiphenyl; Chemical Abstract Service number: 74472-50-7; surrogate standard: CB103; reference compound: cb191; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb194 Conc Format
| Seq. Order: | 75 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,3,3,4,4,5,5-octachlorobiphenyl; Chemical Abstract Service number: 35694-08-7; surrogate standard: CB103; reference compound: cb194; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb195 Conc Format
| Seq. Order: | 76 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,3,3,4,4,5,6-octachlorobiphenyl; Chemical Abstract Service number: 52663-78-2; surrogate standard: CB103; reference compound: cb195; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb199 Conc Format
| Seq. Order: | 77 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,3,3,4,5,5,6-octachlorobiphenyl; Chemical Abstract Service number: 52663-75-9; surrogate standard: CB103; reference compound: cb199; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb205 Conc Format
| Seq. Order: | 78 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,3,3,4,4,5,5,6-octachlorobiphenyl; Chemical Abstract Service number: 74472-53-0; surrogate standard: CB103; reference compound: cb205; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb206 Conc Format
| Seq. Order: | 79 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,3,3,4,4,5,5,6-nonachlorobiphenyl; Chemical Abstract Service number: 40186-72-9; surrogate standard: CB103; reference compound: cb206; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb208 Conc Format
| Seq. Order: | 80 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,3,3,4,5,5,6,6-nonachlorobiphenyl; Chemical Abstract Service number: 52663-77-1; surrogate standard: CB103; reference compound: cb208; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
cb209 Conc Format
| Seq. Order: | 81 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name decachlorobiphenyl; Chemical Abstract Service number: 2051-24-3; surrogate standard: CB103; reference compound: cb209; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
opDDD Conc Format
| Seq. Order: | 82 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name o,p-DDD, 1,1-dichloro-2-(o-chlorophenyl)-2-(p-chlorophenyl)-ethane; Chemical Abstract Service number: 53-19-0; surrogate standard: CB103; reference compound: opddd; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
opdde Conc Format
| Seq. Order: | 83 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name o,p-DDE, 1,1-dichloro-2-(o-chlorophenyl)-2-(p-chlorophenyl)-ethylene; Chemical Abstract Service number: 3424-82-6; surrogate standard: CB103; reference compound: opdde; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
opDDT Conc Format
| Seq. Order: | 84 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name o,p-DDT, 1,1,1-trichloro-2-(o-chlorophenyl)-2-(p-chlorophenyl)-ethane; Chemical Abstract Service number: 789-02-6; surrogate standard: CB103; reference compound: opddt; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
ppDDD Conc Format
| Seq. Order: | 85 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name p,p-DDD, 1,1-dichloro-2,2-bis(p-chlorophenyl)-ethane; Chemical Abstract Service number: 72-54-8; surrogate standard: CB103; reference compound: ppddd; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
ppDDE Conc Format
| Seq. Order: | 86 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name p,p-DDE, 1,1-dichloro-2,2-bis(p-chlorophenyl)-ethylene; Chemical Abstract Service number: 72-55-9; surrogate standard: CB103; reference compound: ppdde; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
ppDDT Conc Format
| Seq. Order: | 87 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name p,p-DDT, 1,1,1-trichloro-2,2-bis(p-chlorophenyl)-ethane; Chemical Abstract Service number: 50-29-3; surrogate standard: CB103; reference compound: ppddt; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
Sum CHLDs Conc Format
| Seq. Order: | 88 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 21 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name Sum CHLDs is the sum of a-chlordane, cis-nonachlor, g-chlordane, heptachlor, heptachlor epoxide, nonachlor III (a chlordane metabolite that we do not have a CAS number for, presumed to be 1-exo,2,2,4,5,6,7,8,8-octachloro-3a,4,7,7a-tetrahydro-4,7-methanoindane), oxychlordane, and trans-nonachlor. ; surrogate standard: CB103; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
Sum DDTs Conc Format
| Seq. Order: | 89 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 20 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name Sum DDTs is the sum of opDDD, opDDE, opDDT, ppDDD, ppDDE, and ppDDT. ; surrogate standard: CB103; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
Sum HCHs Conc Format
| Seq. Order: | 90 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 20 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name Sum HCHs is the sum of aHCH, bHCH and lindane (gHCH). ; surrogate standard: CB103; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
Sum40CBs Conc Format
| Seq. Order: | 91 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 20 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name Sum40CBs is the sum of the 40 chlorobiphenyl congeners listed above (plus their coelutors); surrogate standard: CB103; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
Sum6CBs Conc Format
| Seq. Order: | 92 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 19 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name Sum6CBs is the sum of the concentrations of chlorobiphenyl congeners cb28, cb52, cb101, cb153, cb138, and cb180 (EU regulatory sum for seafood safety); surrogate standard: CB103; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
BDE28 conc format
| Seq. Order: | 93 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,4,4-tribromodiphenyl ether; Chemical Abstract Service number: 41318-75-6; surrogate standard: CB103; reference compound: bde28; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
BDE47 conc format
| Seq. Order: | 94 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,4,4-tetrabromodiphenyl ether; Chemical Abstract Service number: 5436-43-1; surrogate standard: CB103; reference compound: bde47; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
BDE49 conc format
| Seq. Order: | 95 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,4,5-tetrabromodiphenyl ether; Chemical Abstract Service number: 243982-82-3; surrogate standard: CB103; reference compound: bde49; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
BDE66 conc format
| Seq. Order: | 96 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,3,4,4-tetrabromodiphenyl ether; Chemical Abstract Service number: 189084-61-5; surrogate standard: CB103; reference compound: bde66; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
BDE85 conc format
| Seq. Order: | 97 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,3,4,4-pentabromodiphenyl ether; Chemical Abstract Service number: 182346-21-0; surrogate standard: CB103; reference compound: BDE99; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
BDE99 conc format
| Seq. Order: | 98 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 17 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,4,4,5-pentabromodiphenyl ether; Chemical Abstract Service number: 60348-60-9; surrogate standard: CB103; reference compound: bde99; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
BDE100 conc format
| Seq. Order: | 99 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 18 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,4,4,6-pentabromodiphenyl ether; Chemical Abstract Service number: 189084-64-8; surrogate standard: CB103; reference compound: bde100; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
Br5DE04 conc format
| Seq. Order: | 100 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 19 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name Pentabromodiphenyl ether, congener ID unknown.; surrogate standard: CB103; reference compound: BDE99; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
Br5DE05 conc format
| Seq. Order: | 101 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 19 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name Pentabromodiphenyl ether, congener ID unknown.; surrogate standard: CB103; reference compound: BDE99; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
BDE153 conc format
| Seq. Order: | 102 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 18 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,4,4,5,5-hexabromodiphenyl ether; Chemical Abstract Service number: 68631-49-2; surrogate standard: CB103; reference compound: bde153; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
BDE154 conc format
| Seq. Order: | 103 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 18 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,4,4,5,6-hexabromodiphenyl ether; Chemical Abstract Service number: 207122-15-4; surrogate standard: CB103; reference compound: bde154; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
Br6DE01 conc format
| Seq. Order: | 104 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 19 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name Hexabromodiphenyl ether, congener ID unknown.; surrogate standard: CB103; reference compound: BDE154; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
BDE155 conc format
| Seq. Order: | 105 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 18 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,4,4,6,6-hexabromodiphenyl ether; Chemical Abstract Service number: 35854-94-5; surrogate standard: CB103; reference compound: bde155; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
BDE183 conc format
| Seq. Order: | 106 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 18 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name 2,2,3,4,4,5,6-heptabromodiphenyl ether; Chemical Abstract Service number: 207122-16-5; surrogate standard: CB103; reference compound: bde183; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
Br7DE01 conc format
| Seq. Order: | 107 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 19 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name Heptabromodiphenyl ether, congener ID unknown.; surrogate standard: CB103; reference compound: BDE183; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |
SumBDE conc format
| Seq. Order: | 108 |
|---|---|
| Data Storage Type: | VARCHAR2 |
| Max Length: | 18 |
| Required: | No |
| Primary Key: | No |
| Status: | Active |
| Description: |
Analyte concentration. POP; chemical name SumBDEs is the sum of all the individual BDE congeners listed.; surrogate standard: CB103; References: Tech memo NMFS-NWFSC-125 (analytical protocols); Tech memo NMFS-NWFSC-77 (quality assurance plan). Units for values are ng/g, wet wt. |
| General Data Type: | VARCHAR2 |
| Unit of Measure: | ng/g, wet wt |
| Allowed Values: | < LOQ - num (LOQ is the lower limit of quantitation) |