2011 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Burns Study Ar...

Item Identification

Title:	2011 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Burns Study Area
Short Name:	or2011_dogami_burns_m1427_metadata
Status:	Completed
Publication Date:	2012
Abstract:	The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for multiple areas within the State of Oregon. The areas for LiDAR collection have been designed as part of a collaborative effort of state, federal, and local agencies in order to meet a wide range of project goals. This LiDAR data set was collected from June 19 - 21, 2011 and encompasses a portion of Harney County in Oregon. This data set consists of bare earth and unclassified points. The average pulse density is 8.25 pulses per square meter over terrestrial surfaces. The area of interest (AOI) totals 79 square miles (49,083 acres) and the total area flown (TAF) covers 80 square miles (51,401 acres). The TAF acreage is greater than the original AOI acreage due to buffering and flight planning optimization. In some areas of heavy vegetation or forest cover, there may be relatively few ground points in the LiDAR data. Elevation values for open water surfaces are not valid elevation values because few LiDAR points are returned from water surfaces. LiDAR intensity values were also collected. Original contact information: Contact Name: Ian Madin Contact Org: DOGAMI Phone: 971-673-1542 Email: ian.madin@dogami.state.or.us
Purpose:	Provide high resolution terrain elevation and land cover elevation data.
Notes:	10565
Supplemental Information:	The final LiDAR Report for the Burns study area may be accessed at: https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/1427/supplemental/OLC_Burns.pdf A footprint of this data set may be viewed in Google Earth at: https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/1427/supplemental/2011_Oregon_DOGAMI_Burns_Lidar.kmz

Keywords

Theme Keywords

Thesaurus	Keyword
ISO 19115 Topic Category	elevation
UNCONTROLLED
None	Bare earth
None	Bare ground
None	DOGAMI
None	High-resolution
None	Light Detection and Ranging

Thesaurus

Keyword

ISO 19115 Topic Category

elevation

UNCONTROLLED

None

Bare earth

None

Bare ground

None

DOGAMI

None

High-resolution

None

Light Detection and Ranging

Physical Location

Organization:	Office for Coastal Management
City:	Charleston
State/Province:	SC

Data Set Information

Data Set Scope Code:	Data Set
Maintenance Frequency:	None Planned
Distribution Liability:	Any conclusions drawn from the analysis of this information are not the responsibility of the Oregon Department of Geology and Mineral Industries (DOGAMI), the Office for Coastal Management or its partners.
Data Set Credit:	DOGAMI

Support Roles

Data Steward

CC ID: 683342

Date Effective From:	2012
Date Effective To:
Contact (Organization):	NOAA Office for Coastal Management (NOAA/OCM)
Address:	2234 South Hobson Ave Charleston, SC 29405-2413
Email Address:	coastal.info@noaa.gov
Phone:	(843) 740-1202
URL:	https://coast.noaa.gov

Distributor

CC ID: 683344

Date Effective From:	2012
Date Effective To:
Contact (Organization):	NOAA Office for Coastal Management (NOAA/OCM)
Address:	2234 South Hobson Ave Charleston, SC 29405-2413
Email Address:	coastal.info@noaa.gov
Phone:	(843) 740-1202
URL:	https://coast.noaa.gov

Metadata Contact

CC ID: 683345

Date Effective From:	2012
Date Effective To:
Contact (Organization):	NOAA Office for Coastal Management (NOAA/OCM)
Address:	2234 South Hobson Ave Charleston, SC 29405-2413
Email Address:	coastal.info@noaa.gov
Phone:	(843) 740-1202
URL:	https://coast.noaa.gov

Point of Contact

CC ID: 683343

Date Effective From:	2012
Date Effective To:
Contact (Organization):	NOAA Office for Coastal Management (NOAA/OCM)
Address:	2234 South Hobson Ave Charleston, SC 29405-2413
Email Address:	coastal.info@noaa.gov
Phone:	(843) 740-1202
URL:	https://coast.noaa.gov

Extents

Currentness Reference:	Ground Condition

Extent Group 1

Extent Group 1 / Geographic Area 1

CC ID: 1133356

W° Bound:	-119.173407
E° Bound:	-118.870607
N° Bound:	43.698861
S° Bound:	43.495661

Extent Group 1 / Time Frame 1

CC ID: 1133355

Time Frame Type:	Range
Start:	2011-06-19
End:	2011-06-21

Spatial Information

Spatial Representation

Representations Used

Vector:	Yes

Access Information

Security Class:	Unclassified
Data Access Procedure:	This data can be obtained on-line at the following URL: https://coast.noaa.gov/dataviewer/#/lidar/search/where:ID=1427 This data set is dynamically generated based on user-specified parameters. ;
Data Access Constraints:	None
Data Use Constraints:	Users should be aware that temporal changes may have occurred since this data set was collected and some parts of this data may no longer represent actual surface conditions. Users should not use this data for critical applications without a full awareness of its limitations.

Distribution Information

Distribution 1

CC ID: 742097

Download URL:	https://coast.noaa.gov/dataviewer/#/lidar/search/where:ID=1427
Distributor:
File Name:	Customized Download
Description:	Create custom data files by choosing data area, product type, map projection, file format, datum, etc.

Distribution 2

CC ID: 742098

Download URL:	https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/1427/index.html
Distributor:
File Name:	Bulk Download
Description:	Simple download of data files.

URLs

URL 1

CC ID: 742100

URL:	https://coast.noaa.gov/dataviewer
URL Type:	Online Resource

URL 2

CC ID: 742101

URL:	https://coast.noaa.gov
URL Type:	Online Resource

URL 3

CC ID: 742102

URL:	https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/1427/supplemental/2011_Oregon_DOGAMI_Burns_Lidar.kmz
Name:	Browse Graphic
URL Type:	Browse Graphic
File Resource Format:	kmz
Description:	This graphic shows the lidar coverage for the Burns Study Area.

Activity Log

Activity Log 1

CC ID: 683366

Activity Date/Time:	2016-05-23
Description:	Date that the source FGDC record was last modified.

Activity Log 2

CC ID: 683365

Activity Date/Time:	2017-11-14
Description:	Converted from FGDC Content Standards for Digital Geospatial Metadata (version FGDC-STD-001-1998) using 'fgdc_to_inport_xml.pl' script. Contact Tyler Christensen (NOS) for details.

Activity Log 3

CC ID: 718503

Activity Date/Time:	2018-02-08
Description:	Partial upload of Positional Accuracy fields only.

Activity Log 4

CC ID: 742099

Activity Date/Time:	2018-03-13
Description:	Partial upload to move data access links to Distribution Info.

Technical Environment

Description:	Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 2; ESRI ArcCatalog 9.2.0.1324

Data Quality

Horizontal Positional Accuracy:	Not specified in final report, assumed to be 1 m.
Vertical Positional Accuracy:	The Root Mean Square Error (RMSE) of the data is 0.03 meters. Accuracy was assessed using 594 RTK (real time kinematic) ground survey points. These ground survey points are distributed throughout the Burns study area. The final LiDAR Report for the Burns study area may be accessed at: https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/1427/supplemental/OLC_Burns.pdf
Completeness Report:	LiDAR data has been collected and processed for all areas within the project study area.
Conceptual Consistency:	LiDAR flight lines have been examined to ensure that there is at least 50% sidelap, that there are no gaps between flightlines, and that overlapping flightlines have consistent elevation values. Shaded relief images have been visually inspected for data errors such as pits, border artifacts, gaps, and shifting.

Lineage

Process Steps

Process Step 1

CC ID: 1133352

Description:	No metadata was provided to NOAA OCM along with this lidar data set. The following process step contains information derived from the metadata record of another 2011 Oregon DOGAMI lidar data set and the Watershed Sciences, Inc. lidar report. This lidar report may be accessed at: https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/1427/supplemental/OLC_Burns.pdf Acquisition 1. The lidar data were collected between June 19 - 21, 2011. 2. The survey used a Leica SN094 sensor mounted in a Cessna Caravan 208B. 3. Near nadir scan angles were used to increase penetration of vegetation to ground surfaces. 4. Ground level GPS and aircraft IMU were collected during the flight. Processing 1. Flight lines and data were reviewed to ensure complete coverage of the study area and positional accuracy of the laser points. 2. Laser point return coordinates were computed using ALS Post Processor software and IPAS Pro GPS/INS software, based on independent data from the LiDAR system, IMU, and aircraft. 3. The raw LiDAR file was assembled into flight lines per return with each point having an associated x, y, and z coordinate. 4. Visual inspection of swath to swath laser point consistencies within the study area were used to perform manual refinements of system alignment. 5. Custom algorithms were designed to evaluate points between adjacent flight lines. Automated system alignment was computed based upon randomly selected swath to swath accuracy measurements that consider elevation, slope, and intensities. Specifically, refinement in the combination of system pitch, roll and yaw offset parameters optimize internal consistency. 6. Noise (e.g., pits and birds) was filtered using ALS postprocessing software, based on known elevation ranges and included the removal of any cycle slips. 7. Using TerraScan and Microstation, ground classifications utilized custom settings appropriate to the study area. 8. The corrected and filtered return points were compared to the RTK ground survey points collected to verify the vertical and horizontal accuracies. 9. Points were output as laser points, TINed and GRIDed surfaces
Process Date/Time:	2011-01-01 00:00:00

Description:

No metadata was provided to NOAA OCM along with this lidar data set. The following process step contains information

derived from the metadata record of another 2011 Oregon DOGAMI lidar data set and the Watershed Sciences, Inc. lidar

report. This lidar report may be accessed at:

https://noaa-nos-coastal-lidar-pds.s3.amazonaws.com/laz/geoid18/1427/supplemental/OLC_Burns.pdf

Acquisition

1. The lidar data were collected between June 19 - 21, 2011.

2. The survey used a Leica SN094 sensor mounted in a Cessna Caravan 208B.

3. Near nadir scan angles were used to increase penetration of vegetation to ground surfaces.

4. Ground level GPS and aircraft IMU were collected during the flight.

Processing

1. Flight lines and data were reviewed to ensure complete coverage of the study area and positional accuracy of the laser points.

2. Laser point return coordinates were computed using ALS Post Processor software and IPAS Pro GPS/INS software, based on independent

data from the LiDAR system, IMU, and aircraft.

3. The raw LiDAR file was assembled into flight lines per return with each point having an associated x, y, and z coordinate.

4. Visual inspection of swath to swath laser point consistencies within the study area were used to perform manual refinements of

system alignment.

5. Custom algorithms were designed to evaluate points between adjacent flight lines. Automated system alignment was computed based

upon randomly selected swath to swath accuracy measurements that consider elevation, slope, and intensities. Specifically,

refinement in the combination of system pitch, roll and yaw offset parameters optimize internal consistency.

6. Noise (e.g., pits and birds) was filtered using ALS postprocessing software, based on known elevation ranges and included the

removal of any cycle slips.

7. Using TerraScan and Microstation, ground classifications utilized custom settings appropriate to the study area.

8. The corrected and filtered return points were compared to the RTK ground survey points collected to verify the vertical and

horizontal accuracies.

9. Points were output as laser points, TINed and GRIDed surfaces

Process Date/Time:

2011-01-01 00:00:00

Process Step 2

CC ID: 1133353

Description:	The NOAA Office for Coastal Management (OCM) received the files in las format. The files contained LiDAR elevation and intensity measurements. The data were in UTM Zone 11, NAD83 (CORS96) coordinates, NAVD88 (Geoid03) vertical datum and units in meters. OCM performed the following processing for data storage and Digital Coast provisioning purposes: 1. The data were converted from UTM Zone 11 coordinates to geographic coordinates. 2. The data were converted from NAVD88 (orthometric) heights to GRS80 (ellipsoid) heights using Geoid03. 3. The data were sorted by time and zipped to laz format.
Process Date/Time:	2012-12-01 00:00:00

Description:

The NOAA Office for Coastal Management (OCM) received the files in las format. The files contained LiDAR

elevation and intensity measurements. The data were in UTM Zone 11, NAD83 (CORS96) coordinates, NAVD88 (Geoid03) vertical

datum and units in meters. OCM performed the following processing for data storage and Digital Coast provisioning purposes:

1. The data were converted from UTM Zone 11 coordinates to geographic coordinates.

2. The data were converted from NAVD88 (orthometric) heights to GRS80 (ellipsoid) heights using Geoid03.

3. The data were sorted by time and zipped to laz format.

Process Date/Time:

2012-12-01 00:00:00

Catalog Details

Catalog Item ID:	49921
GUID:	gov.noaa.nmfs.inport:49921
Metadata Record Created By:	Anne Ball
Metadata Record Created:	2017-11-15 15:23+0000
Metadata Record Last Modified By:	SysAdmin InPortAdmin
Metadata Record Last Modified:	2022-08-09 17:11+0000
Metadata Record Published:	2022-03-16
Owner Org:	OCMP
Metadata Publication Status:	Published Externally
Do Not Publish?:	N
Metadata Last Review Date:	2022-03-16
Metadata Review Frequency:	1 Year
Metadata Next Review Date:	2023-03-16