EPA2011 Physical Nutrients Microbes
Entity (ENT) | Northwest Fisheries Science Center (NWFSC)GUID: gov.noaa.nmfs.inport:51623 | Updated: August 9, 2022 | Published / External
-
View As
- Full List View
- Printable Form
- EXPORTS
- InPort XML
- View in Hierarchy
Summary
Table contains results of 7 monthly samplings between April and October 2011 of pelagic waters of Puget Sound, WA.
DescriptionTable contains results of 7 monthly samplings between April and October 2011 of pelagic waters of Puget Sound, WA.
Entity Information
Entity Type
Spreadsheet
Data Attribute / Type | Description |
---|---|
Unique ID
number |
sample identifier. |
Latitude
number |
latitude. Units for values are degrees. |
Longitude
number |
longitude. Units for values are degrees. |
Water temperature Niskin
number |
water temperature from Niskin bottle. Units for values are C. |
Chlorophyll a mean ng per L
number |
chlorophyll a concentration. Units for values are ng per ml. |
NO3 micromolar
number |
nitrite. Units for values are m. |
NO2 micromolar
number |
nitrate. Units for values are m. |
NH4 micromolar
number |
ammonium. Units for values are m. |
PO4 micromolar
number |
phosphate. Units for values are m. |
SiOH4 micromolar
number |
silicate. Units for values are m. |
FACS total bacteria cells per ml
number |
total bacteria. Units for values are cells per ml. |
FACS hi NA bacteria cells per ml
number |
high nucleic acid bacteria. Units for values are cells per ml. |
FACS low NA bacteria cells per ml
number |
low nucleic acid bacteria. Units for values are cells per ml. |
FACS Synecho cells per ml
number |
Synechococcus. Units for values are cells per ml. |
FACS picophyto cells per ml
number |
eukaryotic phytoplankton. Units for values are cells per ml. |
FACS diatom cells per ml
number |
single small nanophytoplankton. Units for values are cells per ml. |
hetero production g C per L per hour
number |
microbial_production. Units for values are g carbon per L per hr. |
Area Ag Buffer m2
number |
area of shore buffer in agricultural use. Units for values are square m. |
Area Ag Catch m2
number |
area of watershed catchment in agricultural use. Units for values are square m. |
Area Dev Buffer m2
number |
area of shore buffer in development use. Units for values are square m. |
Area Dev Catch m2
number |
area of watershed catchment in devekionebt use. Units for values are square m. |
Area Imp Buffer m2
number |
area of shore buffer in impervious use. Units for values are square m. |
Area Imp Catch m2
number |
area of watershed catchment in impervious use. Units for values are square m. |
Catchment Area m2
number |
total watershed catchment area. Units for values are square m. |
Pct Ag Buffer
number |
percent of shore buffer in agricultural use. Units for values are percentage. |
Pct Ag Catch
number |
percent of watershed catchment in agricultural use. Units for values are percentage. |
Pct Dev Catch
number |
percent of shore buffer in development use. Units for values are percentage. |
Pct Developed Buffer
number |
percent of watershed catchment in devekionebt use. Units for values are percentage. |
Pct Imp Buffer
number |
percent of shore buffer in impervious use. Units for values are percentage. |
Pct Imp Catch
number |
percent of watershed catchment in impervious use. Units for values are percentage. |
Shoreline Buffer Area m2
number |
total shoreline buffer area. Units for values are square m. |
Shoreline Length m
number |
total shoreline length. Units for values are m. |
date
date |
date of sampling. |
day of year
number |
day of year. Units for values are integer. |
timePST
time |
time in Pacific Standard Time. Units for values are time. |
master tow
number |
tow number. Units for values are integer. |
data flag
text |
comment about data. |
CTD ID
number |
CTD identifier. Units for values are integer. |
Geomorphic unit
text |
geomorphic unit. Units for values are text. |
cast key2
text |
CTD cast key. Units for values are text. |
site name
text |
site name code. Units for values are text. |
6m cast compensated oxygen mg per L
number |
compensated dissolved oxygen at 6m. Units for values are mg per L. |
6m compensated pH
number |
compensated pH at 6m. Units for values are pH units. |
6m conductivity S per cm
number |
conductivity at 6m. Units for values are S per cm. |
6m density kg per m3
number |
density at 6m. Units for values are kilograms per meter cubed - 1000. |
6m fluorescence mg per m3
number |
fluorescence at 6m. Units for values are mg per cubic m. |
6m oxygen mg per L
number |
dissolved oxygen at 6m. Units for values are mg per L. |
6m PAR
number |
photosynthetically active radiation at 6m. Units for values are Einsteins per square m per sec. |
6m pH
number |
pH at 6m. Units for values are pH units. |
6m salinity PSU
number |
salinity at 6m. Units for values are practical salinity units. |
6m temp C
number |
water temperature at 6m. Units for values are C. |
6m turbidity
number |
turbidity at 6m. Units for values are formazin turbidity unit. |
ave cast compensated oxygen mg per L
number |
average compensated dissolved oxygen for cast. Units for values are mg per L. |
ave cast compensated pH
number |
average compensated pH for cast. Units for values are pH units. |
ave cast conductivity S per cm
number |
average conductivity for cast. Units for values are S per cm. |
ave cast density kg per m3
number |
average density for cast. Units for values are kilograms per meter cubed - 1000. |
ave cast fluorescence mg per m3
number |
average fluorescence for cast. Units for values are mg per cubic m. |
ave cast oxygen mg per L
number |
average dissolved oxygen for cast. Units for values are mg per L. |
ave cast pH
number |
average pH for cast. Units for values are pH units. |
ave cast salinity PSU
number |
average salinity for cast. Units for values are practical salinity units. |
ave cast temp C
number |
average water temperature for cast. Units for values are C. |
ave cast turbidity
number |
average turbidity for cast. Units for values are formazin turbidity unit. |
max cast compensated oxygen mg per L
number |
maximum compensated dissolved oxygen for cast. Units for values are mg per L. |
max cast compensated pH
number |
maximum compensated pH for cast. Units for values are pH units. |
max cast conductivity uS per cm
number |
maximum conductivity for cast. Units for values are S per cm. |
max cast density kg per m3
number |
maximum density for cast. Units for values are kilograms per meter cubed - 1000. |
max cast depth m
number |
maximum depth of case. Units for values are m. |
max cast fluorescence mg per m3
number |
maximum fluorescence for cast. Units for values are mg per cubic m. |
max cast oxygen mg per L
number |
maximum dissolved oxygen for cast. Units for values are mg per L. |
max cast pH
number |
maximum pH for cast. Units for values are pH units. |
max cast salinity PSU
number |
maximum salinity for cast. Units for values are practical salinity units. |
max cast temp C
number |
maximum water temperature for cast. Units for values are C. |
max cast turbidity
number |
maximum turbidity for cast. Units for values are formazin turbidity unit. |
maxdepth cast compensated oxygen mg per L
number |
compensated dissolved oxygen at maximum depth of cast. Units for values are mg per L. |
maxdepth compensated pH
number |
compensated pH at maximum depth of cast. Units for values are pH units. |
maxdepth conducitivity uS per cm
number |
conductivity at maximum depth of cast. Units for values are S per cm. |
maxdepth density kg per m3
number |
density at maximum depth of cast. Units for values are kilograms per meter cubed - 1000. |
maxdepth fluorescence mg per m3
number |
fluorescence at maximum depth of cast. Units for values are m. |
maxdepth oxygen mg per L
number |
dissolved oxygen at maximum depth of cast. Units for values are mg per cubic m. |
maxdepth PAR
number |
photsynthetically active radiation at maximum depth of cast. |
maxdepth pH
number |
pH at maximum depth of cast. Units for values are pH units. |
maxdepth salinity PSU
number |
salinity at maximum depth of cast. Units for values are practical salinity units. |
maxdepth temp C
number |
water temperature at maximum depth of cast. Units for values are C. |
maxdepth turbidity
number |
turbidity at maximum depth of cast. Units for values are formazin turbidity unit. |
min cast compensated oxygen mg per L
number |
minimum compensated dissolved oxygen for cast. Units for values are mg per L. |
min cast compensated pH
number |
minimum compensated pH for cast. Units for values are pH units. |
min cast conductivity uS per cm
number |
minimum conductivity for cast. Units for values are S per cm. |
min cast density kg per m3
number |
minimum density for cast. Units for values are kilograms per meter cubed - 1000. |
min cast depth m
number |
minimum depth of cast. Units for values are meters. |
min cast fluorescence mg per m3
number |
minimum fluorescence for cast. Units for values are mg per cubic m. |
min cast oxygen mg per L
number |
minimum dissolved oxygen for cast. Units for values are mg per L. |
min cast pH
number |
minimum pH for cast. Units for values are pH units. |
min cast salinity PSU
number |
minimum salinity for cast. Units for values are practical salinity units. |
min cast temp C
number |
minimum water temperature for cast. Units for values are C. |
min cast turbidity
number |
minimum turbidity for cast. Units for values are formazin turbidity unit. |
photosynthetic compensation depth m
number |
photsynthetic compensation depth. Units for values are m. |
surface cast compensated oxygen mg per L
number |
compensated dissolved oxygen for surface cast. Units for values are mg per L. |
surface compensated pH
number |
compensated pH for surface surface cast. Units for values are pH units. |
surface conducitivity uS per cm
number |
conductivity for surface cast. Units for values are S per cubic m. |
surface density kg per m3
number |
density for surface cast. Units for values are kilograms per meter cubed - 1000. |
surface fluorescence mg per m3
number |
fluorescence for surface cast. Units for values are mg per cubic m. |
surface oxygen mg per L
number |
dissolved oxygen for surface cast. Units for values are mg per L. |
surface pH
number |
pH for surface cast. Units for values are pH units. |
surface salinity PSU
number |
salinity for surface cast. Units for values are practical salinity units. |
surface temp C
number |
water temperature for surface cast. Units for values are C. |
surface turbidity
number |
minimum turbidity for cast. Units for values are formazin turbidity unit. |
Child Items
No Child Items for this record.
Contact Information
No contact information is available for this record.
Please contact the owner organization (NWFSC) for inquiries on this record.
Item Identification
Title: | EPA2011 Physical Nutrients Microbes |
---|---|
Short Name: | EPA2011 Physical Nutrients Microbes |
Status: | Planned |
Abstract: |
Table contains results of 7 monthly samplings between April and October 2011 of pelagic waters of Puget Sound, WA. |
Entity Information
Entity Type: | Spreadsheet |
---|---|
Active Version?: | Yes |
Schema Name: | PARR |
Description: |
Table contains results of 7 monthly samplings between April and October 2011 of pelagic waters of Puget Sound, WA. |
Data Attributes
Attribute Summary
Name | Type | Description | ||
---|---|---|---|---|
100
|
Unique ID | number | sample identifier. | |
100
|
Latitude | number | latitude. Units for values are degrees. | |
100
|
Longitude | number | longitude. Units for values are degrees. | |
100
|
Water temperature Niskin | number | water temperature from Niskin bottle. Units for values are C. | |
100
|
Chlorophyll a mean ng per L | number | chlorophyll a concentration. Units for values are ng per ml. | |
100
|
NO3 micromolar | number | nitrite. Units for values are m. | |
100
|
NO2 micromolar | number | nitrate. Units for values are m. | |
100
|
NH4 micromolar | number | ammonium. Units for values are m. | |
100
|
PO4 micromolar | number | phosphate. Units for values are m. | |
100
|
SiOH4 micromolar | number | silicate. Units for values are m. | |
100
|
FACS total bacteria cells per ml | number | total bacteria. Units for values are cells per ml. | |
100
|
FACS hi NA bacteria cells per ml | number | high nucleic acid bacteria. Units for values are cells per ml. | |
100
|
FACS low NA bacteria cells per ml | number | low nucleic acid bacteria. Units for values are cells per ml. | |
100
|
FACS Synecho cells per ml | number | Synechococcus. Units for values are cells per ml. | |
100
|
FACS picophyto cells per ml | number | eukaryotic phytoplankton. Units for values are cells per ml. | |
100
|
FACS diatom cells per ml | number | single small nanophytoplankton. Units for values are cells per ml. | |
100
|
hetero production g C per L per hour | number | microbial_production. Units for values are g carbon per L per hr. | |
100
|
Area Ag Buffer m2 | number | area of shore buffer in agricultural use. Units for values are square m. | |
100
|
Area Ag Catch m2 | number | area of watershed catchment in agricultural use. Units for values are square m. | |
100
|
Area Dev Buffer m2 | number | area of shore buffer in development use. Units for values are square m. | |
100
|
Area Dev Catch m2 | number | area of watershed catchment in devekionebt use. Units for values are square m. | |
100
|
Area Imp Buffer m2 | number | area of shore buffer in impervious use. Units for values are square m. | |
100
|
Area Imp Catch m2 | number | area of watershed catchment in impervious use. Units for values are square m. | |
100
|
Catchment Area m2 | number | total watershed catchment area. Units for values are square m. | |
100
|
Pct Ag Buffer | number | percent of shore buffer in agricultural use. Units for values are percentage. | |
100
|
Pct Ag Catch | number | percent of watershed catchment in agricultural use. Units for values are percentage. | |
100
|
Pct Dev Catch | number | percent of shore buffer in development use. Units for values are percentage. | |
100
|
Pct Developed Buffer | number | percent of watershed catchment in devekionebt use. Units for values are percentage. | |
100
|
Pct Imp Buffer | number | percent of shore buffer in impervious use. Units for values are percentage. | |
100
|
Pct Imp Catch | number | percent of watershed catchment in impervious use. Units for values are percentage. | |
100
|
Shoreline Buffer Area m2 | number | total shoreline buffer area. Units for values are square m. | |
100
|
Shoreline Length m | number | total shoreline length. Units for values are m. | |
100
|
date | date | date of sampling. | |
100
|
day of year | number | day of year. Units for values are integer. | |
100
|
timePST | time | time in Pacific Standard Time. Units for values are time. | |
100
|
master tow | number | tow number. Units for values are integer. | |
100
|
data flag | text | comment about data. | |
100
|
CTD ID | number | CTD identifier. Units for values are integer. | |
100
|
Geomorphic unit | text | geomorphic unit. Units for values are text. | |
100
|
cast key2 | text | CTD cast key. Units for values are text. | |
100
|
site name | text | site name code. Units for values are text. | |
100
|
6m cast compensated oxygen mg per L | number | compensated dissolved oxygen at 6m. Units for values are mg per L. | |
100
|
6m compensated pH | number | compensated pH at 6m. Units for values are pH units. | |
100
|
6m conductivity S per cm | number | conductivity at 6m. Units for values are S per cm. | |
100
|
6m density kg per m3 | number | density at 6m. Units for values are kilograms per meter cubed - 1000. | |
100
|
6m fluorescence mg per m3 | number | fluorescence at 6m. Units for values are mg per cubic m. | |
100
|
6m oxygen mg per L | number | dissolved oxygen at 6m. Units for values are mg per L. | |
100
|
6m PAR | number | photosynthetically active radiation at 6m. Units for values are Einsteins per square m per sec. | |
100
|
6m pH | number | pH at 6m. Units for values are pH units. | |
100
|
6m salinity PSU | number | salinity at 6m. Units for values are practical salinity units. | |
100
|
6m temp C | number | water temperature at 6m. Units for values are C. | |
100
|
6m turbidity | number | turbidity at 6m. Units for values are formazin turbidity unit. | |
100
|
ave cast compensated oxygen mg per L | number | average compensated dissolved oxygen for cast. Units for values are mg per L. | |
100
|
ave cast compensated pH | number | average compensated pH for cast. Units for values are pH units. | |
100
|
ave cast conductivity S per cm | number | average conductivity for cast. Units for values are S per cm. | |
100
|
ave cast density kg per m3 | number | average density for cast. Units for values are kilograms per meter cubed - 1000. | |
100
|
ave cast fluorescence mg per m3 | number | average fluorescence for cast. Units for values are mg per cubic m. | |
100
|
ave cast oxygen mg per L | number | average dissolved oxygen for cast. Units for values are mg per L. | |
100
|
ave cast pH | number | average pH for cast. Units for values are pH units. | |
100
|
ave cast salinity PSU | number | average salinity for cast. Units for values are practical salinity units. | |
100
|
ave cast temp C | number | average water temperature for cast. Units for values are C. | |
100
|
ave cast turbidity | number | average turbidity for cast. Units for values are formazin turbidity unit. | |
100
|
max cast compensated oxygen mg per L | number | maximum compensated dissolved oxygen for cast. Units for values are mg per L. | |
100
|
max cast compensated pH | number | maximum compensated pH for cast. Units for values are pH units. | |
100
|
max cast conductivity uS per cm | number | maximum conductivity for cast. Units for values are S per cm. | |
100
|
max cast density kg per m3 | number | maximum density for cast. Units for values are kilograms per meter cubed - 1000. | |
100
|
max cast depth m | number | maximum depth of case. Units for values are m. | |
100
|
max cast fluorescence mg per m3 | number | maximum fluorescence for cast. Units for values are mg per cubic m. | |
100
|
max cast oxygen mg per L | number | maximum dissolved oxygen for cast. Units for values are mg per L. | |
100
|
max cast pH | number | maximum pH for cast. Units for values are pH units. | |
100
|
max cast salinity PSU | number | maximum salinity for cast. Units for values are practical salinity units. | |
100
|
max cast temp C | number | maximum water temperature for cast. Units for values are C. | |
100
|
max cast turbidity | number | maximum turbidity for cast. Units for values are formazin turbidity unit. | |
100
|
maxdepth cast compensated oxygen mg per L | number | compensated dissolved oxygen at maximum depth of cast. Units for values are mg per L. | |
100
|
maxdepth compensated pH | number | compensated pH at maximum depth of cast. Units for values are pH units. | |
100
|
maxdepth conducitivity uS per cm | number | conductivity at maximum depth of cast. Units for values are S per cm. | |
100
|
maxdepth density kg per m3 | number | density at maximum depth of cast. Units for values are kilograms per meter cubed - 1000. | |
100
|
maxdepth fluorescence mg per m3 | number | fluorescence at maximum depth of cast. Units for values are m. | |
100
|
maxdepth oxygen mg per L | number | dissolved oxygen at maximum depth of cast. Units for values are mg per cubic m. | |
100
|
maxdepth PAR | number | photsynthetically active radiation at maximum depth of cast. | |
100
|
maxdepth pH | number | pH at maximum depth of cast. Units for values are pH units. | |
100
|
maxdepth salinity PSU | number | salinity at maximum depth of cast. Units for values are practical salinity units. | |
100
|
maxdepth temp C | number | water temperature at maximum depth of cast. Units for values are C. | |
100
|
maxdepth turbidity | number | turbidity at maximum depth of cast. Units for values are formazin turbidity unit. | |
100
|
min cast compensated oxygen mg per L | number | minimum compensated dissolved oxygen for cast. Units for values are mg per L. | |
100
|
min cast compensated pH | number | minimum compensated pH for cast. Units for values are pH units. | |
100
|
min cast conductivity uS per cm | number | minimum conductivity for cast. Units for values are S per cm. | |
100
|
min cast density kg per m3 | number | minimum density for cast. Units for values are kilograms per meter cubed - 1000. | |
100
|
min cast depth m | number | minimum depth of cast. Units for values are meters. | |
100
|
min cast fluorescence mg per m3 | number | minimum fluorescence for cast. Units for values are mg per cubic m. | |
100
|
min cast oxygen mg per L | number | minimum dissolved oxygen for cast. Units for values are mg per L. | |
100
|
min cast pH | number | minimum pH for cast. Units for values are pH units. | |
100
|
min cast salinity PSU | number | minimum salinity for cast. Units for values are practical salinity units. | |
100
|
min cast temp C | number | minimum water temperature for cast. Units for values are C. | |
100
|
min cast turbidity | number | minimum turbidity for cast. Units for values are formazin turbidity unit. | |
100
|
photosynthetic compensation depth m | number | photsynthetic compensation depth. Units for values are m. | |
100
|
surface cast compensated oxygen mg per L | number | compensated dissolved oxygen for surface cast. Units for values are mg per L. | |
100
|
surface compensated pH | number | compensated pH for surface surface cast. Units for values are pH units. | |
100
|
surface conducitivity uS per cm | number | conductivity for surface cast. Units for values are S per cubic m. | |
100
|
surface density kg per m3 | number | density for surface cast. Units for values are kilograms per meter cubed - 1000. | |
100
|
surface fluorescence mg per m3 | number | fluorescence for surface cast. Units for values are mg per cubic m. | |
100
|
surface oxygen mg per L | number | dissolved oxygen for surface cast. Units for values are mg per L. | |
100
|
surface pH | number | pH for surface cast. Units for values are pH units. | |
100
|
surface salinity PSU | number | salinity for surface cast. Units for values are practical salinity units. | |
100
|
surface temp C | number | water temperature for surface cast. Units for values are C. | |
100
|
surface turbidity | number | minimum turbidity for cast. Units for values are formazin turbidity unit. |
Attribute Details
Unique ID
Seq. Order: | 1 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
sample identifier. |
General Data Type: | number |
Allowed Values: | >0 |
Latitude
Seq. Order: | 2 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
latitude. Units for values are degrees. |
General Data Type: | number |
Unit of Measure: | degrees |
Longitude
Seq. Order: | 3 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
longitude. Units for values are degrees. |
General Data Type: | number |
Unit of Measure: | degrees |
Water temperature Niskin
Seq. Order: | 4 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
water temperature from Niskin bottle. Units for values are C. |
General Data Type: | number |
Unit of Measure: | C |
Allowed Values: | >0 |
Chlorophyll a mean ng per L
Seq. Order: | 5 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
chlorophyll a concentration. Units for values are ng per ml. |
General Data Type: | number |
Unit of Measure: | ng per ml |
Allowed Values: | >0 |
NO3 micromolar
Seq. Order: | 6 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
nitrite. Units for values are m. |
General Data Type: | number |
Unit of Measure: | m |
Allowed Values: | >0 |
NO2 micromolar
Seq. Order: | 7 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
nitrate. Units for values are m. |
General Data Type: | number |
Unit of Measure: | m |
Allowed Values: | >0 |
NH4 micromolar
Seq. Order: | 8 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
ammonium. Units for values are m. |
General Data Type: | number |
Unit of Measure: | m |
Allowed Values: | >0 |
PO4 micromolar
Seq. Order: | 9 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
phosphate. Units for values are m. |
General Data Type: | number |
Unit of Measure: | m |
Allowed Values: | >0 |
SiOH4 micromolar
Seq. Order: | 10 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
silicate. Units for values are m. |
General Data Type: | number |
Unit of Measure: | m |
Allowed Values: | >0 |
FACS total bacteria cells per ml
Seq. Order: | 11 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
total bacteria. Units for values are cells per ml. |
General Data Type: | number |
Unit of Measure: | cells per ml |
Allowed Values: | >0 |
FACS hi NA bacteria cells per ml
Seq. Order: | 12 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
high nucleic acid bacteria. Units for values are cells per ml. |
General Data Type: | number |
Unit of Measure: | cells per ml |
Allowed Values: | >0 |
FACS low NA bacteria cells per ml
Seq. Order: | 13 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
low nucleic acid bacteria. Units for values are cells per ml. |
General Data Type: | number |
Unit of Measure: | cells per ml |
Allowed Values: | >0 |
FACS Synecho cells per ml
Seq. Order: | 14 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Synechococcus. Units for values are cells per ml. |
General Data Type: | number |
Unit of Measure: | cells per ml |
Allowed Values: | >0 |
FACS picophyto cells per ml
Seq. Order: | 15 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
eukaryotic phytoplankton. Units for values are cells per ml. |
General Data Type: | number |
Unit of Measure: | cells per ml |
Allowed Values: | >0 |
FACS diatom cells per ml
Seq. Order: | 16 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
single small nanophytoplankton. Units for values are cells per ml. |
General Data Type: | number |
Unit of Measure: | cells per ml |
Allowed Values: | >0 |
hetero production g C per L per hour
Seq. Order: | 17 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
microbial_production. Units for values are g carbon per L per hr. |
General Data Type: | number |
Unit of Measure: | g carbon per L per hr |
Allowed Values: | >0 |
Area Ag Buffer m2
Seq. Order: | 18 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
area of shore buffer in agricultural use. Units for values are square m. |
General Data Type: | number |
Unit of Measure: | square m |
Allowed Values: | >0 |
Area Ag Catch m2
Seq. Order: | 19 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
area of watershed catchment in agricultural use. Units for values are square m. |
General Data Type: | number |
Unit of Measure: | square m |
Allowed Values: | >0 |
Area Dev Buffer m2
Seq. Order: | 20 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
area of shore buffer in development use. Units for values are square m. |
General Data Type: | number |
Unit of Measure: | square m |
Allowed Values: | >0 |
Area Dev Catch m2
Seq. Order: | 21 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
area of watershed catchment in devekionebt use. Units for values are square m. |
General Data Type: | number |
Unit of Measure: | square m |
Allowed Values: | >0 |
Area Imp Buffer m2
Seq. Order: | 22 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
area of shore buffer in impervious use. Units for values are square m. |
General Data Type: | number |
Unit of Measure: | square m |
Allowed Values: | >0 |
Area Imp Catch m2
Seq. Order: | 23 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
area of watershed catchment in impervious use. Units for values are square m. |
General Data Type: | number |
Unit of Measure: | square m |
Allowed Values: | >0 |
Catchment Area m2
Seq. Order: | 24 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
total watershed catchment area. Units for values are square m. |
General Data Type: | number |
Unit of Measure: | square m |
Allowed Values: | >0 |
Pct Ag Buffer
Seq. Order: | 25 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
percent of shore buffer in agricultural use. Units for values are percentage. |
General Data Type: | number |
Unit of Measure: | percentage |
Allowed Values: | >0 |
Pct Ag Catch
Seq. Order: | 26 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
percent of watershed catchment in agricultural use. Units for values are percentage. |
General Data Type: | number |
Unit of Measure: | percentage |
Allowed Values: | >0 |
Pct Dev Catch
Seq. Order: | 27 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
percent of shore buffer in development use. Units for values are percentage. |
General Data Type: | number |
Unit of Measure: | percentage |
Allowed Values: | >0 |
Pct Developed Buffer
Seq. Order: | 28 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
percent of watershed catchment in devekionebt use. Units for values are percentage. |
General Data Type: | number |
Unit of Measure: | percentage |
Allowed Values: | >0 |
Pct Imp Buffer
Seq. Order: | 29 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
percent of shore buffer in impervious use. Units for values are percentage. |
General Data Type: | number |
Unit of Measure: | percentage |
Allowed Values: | >0 |
Pct Imp Catch
Seq. Order: | 30 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
percent of watershed catchment in impervious use. Units for values are percentage. |
General Data Type: | number |
Unit of Measure: | percentage |
Allowed Values: | >0 |
Shoreline Buffer Area m2
Seq. Order: | 31 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
total shoreline buffer area. Units for values are square m. |
General Data Type: | number |
Unit of Measure: | square m |
Allowed Values: | >0 |
Shoreline Length m
Seq. Order: | 32 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
total shoreline length. Units for values are m. |
General Data Type: | number |
Unit of Measure: | m |
Allowed Values: | >0 |
date
Seq. Order: | 33 |
---|---|
Data Storage Type: | date |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
date of sampling. |
General Data Type: | date |
day of year
Seq. Order: | 34 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
day of year. Units for values are integer. |
General Data Type: | number |
Unit of Measure: | integer |
Allowed Values: | >0 |
timePST
Seq. Order: | 35 |
---|---|
Data Storage Type: | time |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
time in Pacific Standard Time. Units for values are time. |
General Data Type: | time |
Unit of Measure: | time |
Allowed Values: | >0 |
master tow
Seq. Order: | 36 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
tow number. Units for values are integer. |
General Data Type: | number |
Unit of Measure: | integer |
Allowed Values: | >0 |
data flag
Seq. Order: | 37 |
---|---|
Data Storage Type: | text |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
comment about data. |
General Data Type: | text |
CTD ID
Seq. Order: | 38 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
CTD identifier. Units for values are integer. |
General Data Type: | number |
Unit of Measure: | integer |
Geomorphic unit
Seq. Order: | 39 |
---|---|
Data Storage Type: | text |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
geomorphic unit. Units for values are text. |
General Data Type: | text |
Unit of Measure: | text |
Allowed Values: | delta, exposed, large bay, small bay |
cast key2
Seq. Order: | 40 |
---|---|
Data Storage Type: | text |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
CTD cast key. Units for values are text. |
General Data Type: | text |
Unit of Measure: | text |
site name
Seq. Order: | 41 |
---|---|
Data Storage Type: | text |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
site name code. Units for values are text. |
General Data Type: | text |
Unit of Measure: | text |
6m cast compensated oxygen mg per L
Seq. Order: | 42 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
compensated dissolved oxygen at 6m. Units for values are mg per L. |
General Data Type: | number |
Unit of Measure: | mg per L |
Allowed Values: | >0 |
6m compensated pH
Seq. Order: | 43 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
compensated pH at 6m. Units for values are pH units. |
General Data Type: | number |
Unit of Measure: | pH units |
Allowed Values: | >0 |
6m conductivity S per cm
Seq. Order: | 44 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
conductivity at 6m. Units for values are S per cm. |
General Data Type: | number |
Unit of Measure: | S per cm |
Allowed Values: | >0 |
6m density kg per m3
Seq. Order: | 45 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
density at 6m. Units for values are kilograms per meter cubed - 1000. |
General Data Type: | number |
Unit of Measure: | kilograms per meter cubed - 1000 |
Allowed Values: | >0 |
6m fluorescence mg per m3
Seq. Order: | 46 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
fluorescence at 6m. Units for values are mg per cubic m. |
General Data Type: | number |
Unit of Measure: | mg per cubic m |
Allowed Values: | >0 |
6m oxygen mg per L
Seq. Order: | 47 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
dissolved oxygen at 6m. Units for values are mg per L. |
General Data Type: | number |
Unit of Measure: | mg per L |
Allowed Values: | >0 |
6m PAR
Seq. Order: | 48 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
photosynthetically active radiation at 6m. Units for values are Einsteins per square m per sec. |
General Data Type: | number |
Unit of Measure: | Einsteins per square m per sec |
6m pH
Seq. Order: | 49 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
pH at 6m. Units for values are pH units. |
General Data Type: | number |
Unit of Measure: | pH units |
Allowed Values: | >0 |
6m salinity PSU
Seq. Order: | 50 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
salinity at 6m. Units for values are practical salinity units. |
General Data Type: | number |
Unit of Measure: | practical salinity units |
Allowed Values: | >0 |
6m temp C
Seq. Order: | 51 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
water temperature at 6m. Units for values are C. |
General Data Type: | number |
Unit of Measure: | C |
Allowed Values: | >0 |
6m turbidity
Seq. Order: | 52 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
turbidity at 6m. Units for values are formazin turbidity unit. |
General Data Type: | number |
Unit of Measure: | formazin turbidity unit |
Allowed Values: | >0 |
ave cast compensated oxygen mg per L
Seq. Order: | 53 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
average compensated dissolved oxygen for cast. Units for values are mg per L. |
General Data Type: | number |
Unit of Measure: | mg per L |
Allowed Values: | >0 |
ave cast compensated pH
Seq. Order: | 54 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
average compensated pH for cast. Units for values are pH units. |
General Data Type: | number |
Unit of Measure: | pH units |
Allowed Values: | >0 |
ave cast conductivity S per cm
Seq. Order: | 55 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
average conductivity for cast. Units for values are S per cm. |
General Data Type: | number |
Unit of Measure: | S per cm |
Allowed Values: | >0 |
ave cast density kg per m3
Seq. Order: | 56 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
average density for cast. Units for values are kilograms per meter cubed - 1000. |
General Data Type: | number |
Unit of Measure: | kilograms per meter cubed - 1000 |
Allowed Values: | >0 |
ave cast fluorescence mg per m3
Seq. Order: | 57 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
average fluorescence for cast. Units for values are mg per cubic m. |
General Data Type: | number |
Unit of Measure: | mg per cubic m |
Allowed Values: | >0 |
ave cast oxygen mg per L
Seq. Order: | 58 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
average dissolved oxygen for cast. Units for values are mg per L. |
General Data Type: | number |
Unit of Measure: | mg per L |
Allowed Values: | >0 |
ave cast pH
Seq. Order: | 59 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
average pH for cast. Units for values are pH units. |
General Data Type: | number |
Unit of Measure: | pH units |
Allowed Values: | >0 |
ave cast salinity PSU
Seq. Order: | 60 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
average salinity for cast. Units for values are practical salinity units. |
General Data Type: | number |
Unit of Measure: | practical salinity units |
Allowed Values: | >0 |
ave cast temp C
Seq. Order: | 61 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
average water temperature for cast. Units for values are C. |
General Data Type: | number |
Unit of Measure: | C |
Allowed Values: | >0 |
ave cast turbidity
Seq. Order: | 62 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
average turbidity for cast. Units for values are formazin turbidity unit. |
General Data Type: | number |
Unit of Measure: | formazin turbidity unit |
Allowed Values: | >0 |
max cast compensated oxygen mg per L
Seq. Order: | 63 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
maximum compensated dissolved oxygen for cast. Units for values are mg per L. |
General Data Type: | number |
Unit of Measure: | mg per L |
Allowed Values: | >0 |
max cast compensated pH
Seq. Order: | 64 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
maximum compensated pH for cast. Units for values are pH units. |
General Data Type: | number |
Unit of Measure: | pH units |
Allowed Values: | >0 |
max cast conductivity uS per cm
Seq. Order: | 65 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
maximum conductivity for cast. Units for values are S per cm. |
General Data Type: | number |
Unit of Measure: | S per cm |
Allowed Values: | >0 |
max cast density kg per m3
Seq. Order: | 66 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
maximum density for cast. Units for values are kilograms per meter cubed - 1000. |
General Data Type: | number |
Unit of Measure: | kilograms per meter cubed - 1000 |
Allowed Values: | >0 |
max cast depth m
Seq. Order: | 67 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
maximum depth of case. Units for values are m. |
General Data Type: | number |
Unit of Measure: | m |
Allowed Values: | >0 |
max cast fluorescence mg per m3
Seq. Order: | 68 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
maximum fluorescence for cast. Units for values are mg per cubic m. |
General Data Type: | number |
Unit of Measure: | mg per cubic m |
Allowed Values: | >0 |
max cast oxygen mg per L
Seq. Order: | 69 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
maximum dissolved oxygen for cast. Units for values are mg per L. |
General Data Type: | number |
Unit of Measure: | mg per L |
Allowed Values: | >0 |
max cast pH
Seq. Order: | 70 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
maximum pH for cast. Units for values are pH units. |
General Data Type: | number |
Unit of Measure: | pH units |
Allowed Values: | >0 |
max cast salinity PSU
Seq. Order: | 71 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
maximum salinity for cast. Units for values are practical salinity units. |
General Data Type: | number |
Unit of Measure: | practical salinity units |
Allowed Values: | >0 |
max cast temp C
Seq. Order: | 72 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
maximum water temperature for cast. Units for values are C. |
General Data Type: | number |
Unit of Measure: | C |
Allowed Values: | >0 |
max cast turbidity
Seq. Order: | 73 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
maximum turbidity for cast. Units for values are formazin turbidity unit. |
General Data Type: | number |
Unit of Measure: | formazin turbidity unit |
Allowed Values: | >0 |
maxdepth cast compensated oxygen mg per L
Seq. Order: | 74 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
compensated dissolved oxygen at maximum depth of cast. Units for values are mg per L. |
General Data Type: | number |
Unit of Measure: | mg per L |
Allowed Values: | >0 |
maxdepth compensated pH
Seq. Order: | 75 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
compensated pH at maximum depth of cast. Units for values are pH units. |
General Data Type: | number |
Unit of Measure: | pH units |
Allowed Values: | >0 |
maxdepth conducitivity uS per cm
Seq. Order: | 76 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
conductivity at maximum depth of cast. Units for values are S per cm. |
General Data Type: | number |
Unit of Measure: | S per cm |
Allowed Values: | >0 |
maxdepth density kg per m3
Seq. Order: | 77 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
density at maximum depth of cast. Units for values are kilograms per meter cubed - 1000. |
General Data Type: | number |
Unit of Measure: | kilograms per meter cubed - 1000 |
Allowed Values: | >0 |
maxdepth fluorescence mg per m3
Seq. Order: | 78 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
fluorescence at maximum depth of cast. Units for values are m. |
General Data Type: | number |
Unit of Measure: | m |
Allowed Values: | >0 |
maxdepth oxygen mg per L
Seq. Order: | 79 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
dissolved oxygen at maximum depth of cast. Units for values are mg per cubic m. |
General Data Type: | number |
Unit of Measure: | mg per cubic m |
Allowed Values: | >0 |
maxdepth PAR
Seq. Order: | 80 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
photsynthetically active radiation at maximum depth of cast. |
General Data Type: | number |
Allowed Values: | >0 |
maxdepth pH
Seq. Order: | 81 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
pH at maximum depth of cast. Units for values are pH units. |
General Data Type: | number |
Unit of Measure: | pH units |
Allowed Values: | >0 |
maxdepth salinity PSU
Seq. Order: | 82 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
salinity at maximum depth of cast. Units for values are practical salinity units. |
General Data Type: | number |
Unit of Measure: | practical salinity units |
Allowed Values: | >0 |
maxdepth temp C
Seq. Order: | 83 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
water temperature at maximum depth of cast. Units for values are C. |
General Data Type: | number |
Unit of Measure: | C |
Allowed Values: | >0 |
maxdepth turbidity
Seq. Order: | 84 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
turbidity at maximum depth of cast. Units for values are formazin turbidity unit. |
General Data Type: | number |
Unit of Measure: | formazin turbidity unit |
Allowed Values: | >0 |
min cast compensated oxygen mg per L
Seq. Order: | 85 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
minimum compensated dissolved oxygen for cast. Units for values are mg per L. |
General Data Type: | number |
Unit of Measure: | mg per L |
Allowed Values: | >0 |
min cast compensated pH
Seq. Order: | 86 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
minimum compensated pH for cast. Units for values are pH units. |
General Data Type: | number |
Unit of Measure: | pH units |
Allowed Values: | >0 |
min cast conductivity uS per cm
Seq. Order: | 87 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
minimum conductivity for cast. Units for values are S per cm. |
General Data Type: | number |
Unit of Measure: | S per cm |
Allowed Values: | >0 |
min cast density kg per m3
Seq. Order: | 88 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
minimum density for cast. Units for values are kilograms per meter cubed - 1000. |
General Data Type: | number |
Unit of Measure: | kilograms per meter cubed - 1000 |
Allowed Values: | >0 |
min cast depth m
Seq. Order: | 89 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
minimum depth of cast. Units for values are meters. |
General Data Type: | number |
Unit of Measure: | meters |
Allowed Values: | >0 |
min cast fluorescence mg per m3
Seq. Order: | 90 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
minimum fluorescence for cast. Units for values are mg per cubic m. |
General Data Type: | number |
Unit of Measure: | mg per cubic m |
Allowed Values: | >0 |
min cast oxygen mg per L
Seq. Order: | 91 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
minimum dissolved oxygen for cast. Units for values are mg per L. |
General Data Type: | number |
Unit of Measure: | mg per L |
Allowed Values: | >0 |
min cast pH
Seq. Order: | 92 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
minimum pH for cast. Units for values are pH units. |
General Data Type: | number |
Unit of Measure: | pH units |
Allowed Values: | >0 |
min cast salinity PSU
Seq. Order: | 93 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
minimum salinity for cast. Units for values are practical salinity units. |
General Data Type: | number |
Unit of Measure: | practical salinity units |
Allowed Values: | >0 |
min cast temp C
Seq. Order: | 94 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
minimum water temperature for cast. Units for values are C. |
General Data Type: | number |
Unit of Measure: | C |
Allowed Values: | >0 |
min cast turbidity
Seq. Order: | 95 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
minimum turbidity for cast. Units for values are formazin turbidity unit. |
General Data Type: | number |
Unit of Measure: | formazin turbidity unit |
Allowed Values: | >0 |
photosynthetic compensation depth m
Seq. Order: | 96 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
photsynthetic compensation depth. Units for values are m. |
General Data Type: | number |
Unit of Measure: | m |
Allowed Values: | >0 |
surface cast compensated oxygen mg per L
Seq. Order: | 97 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
compensated dissolved oxygen for surface cast. Units for values are mg per L. |
General Data Type: | number |
Unit of Measure: | mg per L |
Allowed Values: | >0 |
surface compensated pH
Seq. Order: | 98 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
compensated pH for surface surface cast. Units for values are pH units. |
General Data Type: | number |
Unit of Measure: | pH units |
Allowed Values: | >0 |
surface conducitivity uS per cm
Seq. Order: | 99 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
conductivity for surface cast. Units for values are S per cubic m. |
General Data Type: | number |
Unit of Measure: | S per cubic m |
Allowed Values: | >0 |
surface density kg per m3
Seq. Order: | 100 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
density for surface cast. Units for values are kilograms per meter cubed - 1000. |
General Data Type: | number |
Unit of Measure: | kilograms per meter cubed - 1000 |
Allowed Values: | >0 |
surface fluorescence mg per m3
Seq. Order: | 101 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
fluorescence for surface cast. Units for values are mg per cubic m. |
General Data Type: | number |
Unit of Measure: | mg per cubic m |
Allowed Values: | >0 |
surface oxygen mg per L
Seq. Order: | 102 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
dissolved oxygen for surface cast. Units for values are mg per L. |
General Data Type: | number |
Unit of Measure: | mg per L |
Allowed Values: | >0 |
surface pH
Seq. Order: | 103 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
pH for surface cast. Units for values are pH units. |
General Data Type: | number |
Unit of Measure: | pH units |
Allowed Values: | >0 |
surface salinity PSU
Seq. Order: | 104 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
salinity for surface cast. Units for values are practical salinity units. |
General Data Type: | number |
Unit of Measure: | practical salinity units |
Allowed Values: | >0 |
surface temp C
Seq. Order: | 105 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
water temperature for surface cast. Units for values are C. |
General Data Type: | number |
Unit of Measure: | C |
Allowed Values: | >0 |
surface turbidity
Seq. Order: | 106 |
---|---|
Data Storage Type: | number |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
minimum turbidity for cast. Units for values are formazin turbidity unit. |
General Data Type: | number |
Unit of Measure: | formazin turbidity unit |
Allowed Values: | >0 |
Catalog Details
Catalog Item ID: | 51623 |
---|---|
GUID: | gov.noaa.nmfs.inport:51623 |
Metadata Record Created By: | Jeffrey W Cowen |
Metadata Record Created: | 2018-02-23 15:19+0000 |
Metadata Record Last Modified By: | SysAdmin InPortAdmin |
Metadata Record Last Modified: | 2022-08-09 17:11+0000 |
Metadata Record Published: | 2018-02-27 |
Owner Org: | NWFSC |
Metadata Publication Status: | Published Externally |
Do Not Publish?: | N |
Metadata Last Review Date: | 2018-02-27 |
Metadata Review Frequency: | 1 Year |
Metadata Next Review Date: | 2019-02-27 |