Search Help Show/Hide Menu
Home > Catalog Item ID: 56121 >

Data Management Plan

COLREGS Demarcation Lines  |  Data Set (DS)  |  Office for Coastal Management
GUID: gov.noaa.nmfs.inport:56121    |  Published / External

Data Management Plan

DMP Template v2.0.1 (2015-01-01)

Please provide the following information, and submit to the NOAA DM Plan Repository.

Reference to Master DM Plan (if applicable)

As stated in Section IV, Requirement 1.3, DM Plans may be hierarchical. If this DM Plan inherits provisions from a higher-level DM Plan already submitted to the Repository, then this more-specific Plan only needs to provide information that differs from what was provided in the Master DM Plan.

URL of higher-level DM Plan (if any) as submitted to DM Plan Repository:
Always left blank

1. General Description of Data to be Managed

1.1. Name of the Data, data collection Project, or data-producing Program:
COLREGS Demarcation Lines
Taken From: Item Identification | Title
1.2. Summary description of the data:

U.S. collision regulation boundaries delineate those waters upon which mariners shall comply with the International Regulations for Preventing Collisions at Sea, 1972 (72 COLREGS) and those waters upon which mariners shall comply with the Inland Navigation Rules. The waters inland of these lines are subject to the Inland Navigation Rules Act of 1980. The waters outside these lines are subject to the International Navigation Rules of the International Regulations for Preventing Collisions at Sea, 1972 (COLREGS). The Coast Guard has the legal authority to effect regulatory changes to COLREGS. Records in this database are derived from descriptions published in the Code of Federal Regulations Title 33, Part 80 and are for planning purposes only.

Taken From: Item Identification | Abstract
Notes: Only a maximum of 4000 characters will be included.
1.3. Is this a one-time data collection, or an ongoing series of measurements?
One-time data collection
Taken From: Extents / Time Frames | Time Frame Type
Notes: Data collection is considered ongoing if a time frame of type "Continuous" exists.
1.4. Actual or planned temporal coverage of the data:
2019-05-16
Taken From: Extents | Time Frame - Start, Time Frame - End
Notes: All time frames from all extent groups are included.
1.5. Actual or planned geographic coverage of the data:
W: -178.110405, E: 166.634428, N: 71.182005, S: -14.295391
Taken From: Extents | Geographic Area Bounds, Geographic Area Description
Notes: All geographic areas from all extent groups are included.
1.6. Type(s) of data:
(e.g., digital numeric data, imagery, photographs, video, audio, database, tabular data, etc.)
Map (digital)
Taken From: Data Set Information | Data Presentation Form
1.7. Data collection method(s):
(e.g., satellite, airplane, unmanned aerial system, radar, weather station, moored buoy, research vessel, autonomous underwater vehicle, animal tagging, manual surveys, enforcement activities, numerical model, etc.)
No information found
Taken From: Acquisition Information | Instruments, Platforms
1.8. If data are from a NOAA Observing System of Record, indicate name of system:
Always left blank due to field exemption
1.8.1. If data are from another observing system, please specify:
Always left blank due to field exemption

2. Point of Contact for this Data Management Plan (author or maintainer)

2.1. Name:
No information found
Taken From: Support Roles (Metadata Contact) | Person
Notes: The name of the Person of the most recent Support Role of type "Metadata Contact" is used. The support role must be in effect.
2.2. Title:
Metadata Contact
Always listed as "Metadata Contact"
2.3. Affiliation or facility:
Taken From: Support Roles (Metadata Contact) | Organization
Notes: The name of the Organization of the most recent Support Role of type "Metadata Contact" is used. This field is required if applicable.
2.4. E-mail address:
No information found
Notes: The email address is taken from the address listed for the Person assigned as the Metadata Contact in Support Roles.
2.5. Phone number:
No information found
Notes: The phone number is taken from the number listed for the Person assigned as the Metadata Contact in Support Roles. If the phone number is missing or incorrect, please contact your Librarian to update the Person record.

3. Responsible Party for Data Management

Program Managers, or their designee, shall be responsible for assuring the proper management of the data produced by their Program. Please indicate the responsible party below.

3.1. Name:
No information found
Taken From: Support Roles (Data Steward) | Person
Notes: The name of the Person of the most recent Support Role of type "Data Steward" is used. The support role must be in effect.
3.2. Position Title:
Data Steward
Always listed as "Data Steward"

4. Resources

Programs must identify resources within their own budget for managing the data they produce.

4.1. Have resources for management of these data been identified?
No information found
Taken From: Data Management | Have resources for management of these data been identified?
4.2. Approximate percentage of the budget for these data devoted to data management (specify percentage or "unknown"):
No information found
Taken From: Data Management | Approximate percentage of budget for these data devoted to data management

5. Data Lineage and Quality

NOAA has issued Information Quality Guidelines for ensuring and maximizing the quality, objectivity, utility, and integrity of information which it disseminates.

5.1. Processing workflow of the data from collection or acquisition to making it publicly accessible
(describe or provide URL of description):

Process Steps:

  • 2010-01-01 00:00:00 - • Original source data and metadata acquired • Heads up digitize, or coordinate input from original sources • Cross reference between sources • Dissolved unnecessary polyline splits and removed multiparts • On MMS layers dissolved "BDRY_APRV_" • On OC layers dissolved "APPRVDATE" • Populated attribute contents • Validated geometry
  • 2012-01-01 00:00:00 - • Create a new map document RNC service http://egisws02.nos.noaa.gov/ArcGIS/services/NOAA_RNC • Add original feature class and scan for features in CollisionRegulationsBoundary feature class which were missing on RNC • Search COLREGS in the CFR to confirm presence in original feature class • Edit identified features, including descriptions and related fields in the attribute table • Use CFR list of up-to-date locations of Collision Regulations to verify their locations in Atlantic, Gulf of Mexico, and Pacific Oceans
  • 2014-07-01 00:00:00 - • Create a new map document RNC service http://egisws02.nos.noaa.gov/ArcGIS/services/NOAA_RNC • Add original feature class and scan for features in CollisionRegulationsBoundary feature class which were missing on RNC • Create bookmarks in ArcMap of missing or erroneous features and features whose geometry does not match their RNC counterpart • Check current CFR to confirm presence of features in original feature class and to see if new features need to be added • Edit identified features, including descriptions and related fields in the attribute table
  • 2015-04-01 00:00:00 - • Compare original data from MarineCadastre.gov data registry to the 2014 Code of Federal Regulations (CFR) and Raster Navigational Charts (RNC) • Use smallest scale RNC to evaluate features • Add new features from CFR and RNC, and remove old features • Update attribute fields
  • 2019-02-01 00:00:00 - • Download new version of CFR from https://www.govinfo.gov/content/pkg/CFR-2018-title33-vol1/pdf/CFR-2018-title33-vol1.pdf • Adjust geometry of updated COLREGS lines later than 07/01/2014 • These include: 80.155, 80.160, 80.165, 80.501, 80.502, 80.712, 80.748, 80.815, 80.1420, 80.1430, 80.1440, 80.1450, 80.1460, 80.1470 • Use RNC map service as a guide to recreate new geometries
Taken From: Lineage | Lineage Statement, Process Steps (Process Date/Time, Source Citation Title, Description)
5.1.1. If data at different stages of the workflow, or products derived from these data, are subject to a separate data management plan, provide reference to other plan:
Always left blank
5.2. Quality control procedures employed
(describe or provide URL of description):
No information found
Taken From: Data Quality | Quality Control Procedures Employed

6. Data Documentation

The EDMC Data Documentation Procedural Directive requires that NOAA data be well documented, specifies the use of ISO 19115 and related standards for documentation of new data, and provides links to resources and tools for metadata creation and validation.

6.1. Does metadata comply with EDMC Data Documentation directive?
No
Notes: All required DMP fields must be populated and valid to comply with the directive.
6.1.1. If metadata are non-existent or non-compliant, please explain:

Missing/invalid information:

  • 1.7. Data collection method(s)
  • 2.1. Point of Contact Name
  • 2.4. Point of Contact Email
  • 3.1. Responsible Party for Data Management
  • 4.1. Have resources for management of these data been identified?
  • 4.2. Approximate percentage of the budget for these data devoted to data management
  • 5.2. Quality control procedures employed
  • 7.1. Do these data comply with the Data Access directive?
  • 7.1.1. If data are not available or has limitations, has a Waiver been filed?
  • 7.1.2. If there are limitations to data access, describe how data are protected
  • 7.2. Name of organization of facility providing data access
  • 7.2.1. If data hosting service is needed, please indicate
  • 7.3. Data access methods or services offered
  • 7.4. Approximate delay between data collection and dissemination
  • 8.1. Actual or planned long-term data archive location
  • 8.2. Data storage facility prior to being sent to an archive facility
  • 8.3. Approximate delay between data collection and submission to an archive facility
  • 8.4. How will the data be protected from accidental or malicious modification or deletion prior to receipt by the archive?
Notes: Required DMP fields that are not populated or invalid are listed here.
6.2. Name of organization or facility providing metadata hosting:
NMFS Office of Science and Technology
Always listed as "NMFS Office of Science and Technology"
6.2.1. If service is needed for metadata hosting, please indicate:
Always left blank
6.3. URL of metadata folder or data catalog, if known:
https://www.fisheries.noaa.gov/inport/item/56121
Always listed as the URL to the InPort Data Set record
6.4. Process for producing and maintaining metadata
(describe or provide URL of description):
Metadata produced and maintained in accordance with the NOAA Data Documentation Procedural Directive: https://nosc.noaa.gov/EDMC/DAARWG/docs/EDMC_PD-Data_Documentation_v1.pdf
Always listed with the above statement

7. Data Access

NAO 212-15 states that access to environmental data may only be restricted when distribution is explicitly limited by law, regulation, policy (such as those applicable to personally identifiable information or protected critical infrastructure information or proprietary trade information) or by security requirements. The EDMC Data Access Procedural Directive contains specific guidance, recommends the use of open-standard, interoperable, non-proprietary web services, provides information about resources and tools to enable data access, and includes a Waiver to be submitted to justify any approach other than full, unrestricted public access.

7.1. Do these data comply with the Data Access directive?
No information found
Taken From: Data Management | Do these data comply with the Data Access directive?
7.1.1. If the data are not to be made available to the public at all, or with limitations, has a Waiver (Appendix A of Data Access directive) been filed?
No information found
Taken From: Data Management | Is access to the data limited based on an approved waiver?
7.1.2. If there are limitations to public data access, describe how data are protected from unauthorized access or disclosure:
No information found.
Taken From: Access Info | Data Access Constraints
7.2. Name of organization of facility providing data access:
No information found
Taken From: Support Roles (Distributor) | Organization
Notes: The name of the Organization of the most recent Support Role of type "Distributor" is used. The support role must be in effect. This information is not required if an approved access waiver exists for this data.
7.2.1. If data hosting service is needed, please indicate:
No information found
Taken From: Data Management | If data hosting service is needed, please indicate
Notes: This field is required if a Distributor has not been specified.
7.2.2. URL of data access service, if known:
https://marinecadastre.gov/data/
https://marinecadastre.gov/downloads/data/mc/COLREGSDemarcationLine.zip
Taken From: Distribution Info | Download URL
Notes: All URLs listed in the Distribution Info section will be included. This field is required if applicable.
7.3. Data access methods or services offered:
No information found
Taken From: Access Info | Data Access Procedure
7.4. Approximate delay between data collection and dissemination:
No information found
Taken From: Data Management | Approximate delay between data collection and dissemination
7.4.1. If delay is longer than latency of automated processing, indicate under what authority data access is delayed:
Taken From: Data Management | If delay is longer than latency of automated processing, indicate under what authority data access is delayed
Notes: This field is required if applicable.

8. Data Preservation and Protection

The NOAA Procedure for Scientific Records Appraisal and Archive Approval describes how to identify, appraise and decide what scientific records are to be preserved in a NOAA archive.

8.1. Actual or planned long-term data archive location:
(Specify NCEI-MD, NCEI-CO, NCEI-NC, NCEI-MS, World Data Center (WDC) facility, Other, To Be Determined, Unable to Archive, or No Archiving Intended)
No information found
Taken From: Data Management | Actual or planned long-term data archive location
8.1.1. If World Data Center or Other, specify:
Taken From: Data Management | Actual or planned long-term data archive location
Notes: This field is required if archive location is World Data Center or Other.
8.1.2. If To Be Determined, Unable to Archive or No Archiving Intended, explain:
Taken From: Data Management | If To Be Determined, Unable to Archive or No Archiving Intended, explain
Notes: This field is required if archive location is To Be Determined, Unable to Archive, or No Archiving Intended.
8.2. Data storage facility prior to being sent to an archive facility (if any):
Partial information found
Charleston, SC
Taken From: Physical Location | Organization, City, State, Location Description
Notes: Physical Location Organization, City and State are required, or a Location Description is required.
8.3. Approximate delay between data collection and submission to an archive facility:
No information found
Taken From: Data Management | Approximate delay between data collection and submission to an archive facility
8.4. How will the data be protected from accidental or malicious modification or deletion prior to receipt by the archive?
Discuss data back-up, disaster recovery/contingency planning, and off-site data storage relevant to the data collection
No information found
Taken From: Data Management | How will the data be protected from accidental or malicious modification or deletion prior to receipt by the archive?

9. Additional Line Office or Staff Office Questions

Line and Staff Offices may extend this template by inserting additional questions in this section.

Always left blank