GOM FT 2017-08-16 UV run 2

These data were collected as part of the National Oceanic and Atmospheric’s (NOAA) DWH Lessons Learned Studies: Detection of Oil Thickness and Emulsion Mixtures using Remote Sensing Platforms study on methods to estimate oil slick coverage and thickness. The Team developed methods for synoptic collection of satellite imagery, airborne imagery, surface oil characterization, oil and water chemistry, and subsurface oil slick data at both the Oil and Hazardous Materials Simulated Environmental Test Tank (Ohmsett) and the Mississippi Canyon lease block #20 (MC20), which has experienced an ongoing chronic oil discharge since 2004. Data shown here in NOAA’s Environmental Response Management Applications (ERMA) are part of the MC20 field research undertaken in 2016, 2017, and 2018. This research was primarily funded by the U.S. Department of the Interior, the Bureau of Safety and Environmental Enforcement (BSEE), and the Oil Spill Preparedness Division through Interagency Agreement E16PG00023 with the U.S. Department of Commerce, NOAA.

The primary objective of this research was to compare the ability of multiple remote sensing platforms to detect and quantify surface oil, and verify that anomalies identified in remote sensing images corresponded with oil slick features that could be observed and quantified in situ. This research was organized into 3 phases:

Phase 1: Characterized the detection of known oil thicknesses and oil-emulsions in a controlled environment, by performing multiple tests and calibrations for thermal, optical, and microwave sensors at the National Oil Spill Response Research & Renewable Energy Test Facility (Ohmsett) which is located at the Naval Weapons Station Earle Waterfront in Leonardo, New Jersey. Controlled experiments took place during July 2016.

Phase 2: Measured the open water oil thicknesses and oil-emulsions at the damaged Taylor Energy well field surface oiling site (MC20) by performing multiple tests and calibrations for thermal, optical and microwave sensors. Data were collected in November 2016, April 2017, and August 2017.

Phase 3: Developed operational methods and procedures for processing and interpreting each of the sensors products used during the experiments for future emergency operations.

The objective of synoptic sampling at MC20 was to provide data and observations on the water that verified (ground-truth) remote sensing data. The Team attempted to collect as much multi-platform and sensor data as was practicable while scheduling field sampling events to coincide with satellite collections. The Team also collected imagery from Unmanned Aerial Systems (UAS) and as many as four separate fixed-wing aircraft timed to these collections. These data were collected by multiple researchers from NOAA, Ocean Imaging Corp., Water Mapping LLC, University of North Texas (UNT), EPA, WHOI, Fototerra Aerial Survey LLC, and others. A total of 5 different data types are shown here in ERMA: in situ sampling, ship/flight trackline and photos, imagery, oil characterization, and oil on water samples. Summaries of the data collection methods are included below.

Fototerra collected aerial remote sensing data from a dedicated fixed-wing Embraer EMB-110 aircraft at each of the three field sampling events. Fototerra’s Poseidon Platform is equipped with a Multispectral Environmental Data Unit for Surveillance Applications (MEDUSA) system. MEDUSA includes a laser fluorosensor (LFS), a microwave radiometer (MWR), as well as ultraviolet (UV), visible, IR, and bi-spectral ultraviolet/infrared (UV/IR) sensors. Fototerra flew flight lines over MC20 at altitudes ranging from 1,000 to 3,500 feet, collecting data from the suite of sensors.

While NOAA makes every effort to ensure that its databases are error-free, errors do occur. We ask that you notify us immediately of any errors that you discover in our data. We will make every effort to correct them. With respect to documents available from this server, neither the United States Government nor any of its employees, makes any warranty, express or implied, including the warranties of merchantability and fitness for a particular purpose; nor assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed; nor represents that its use would not infringe privately owned rights.

These data may be provisional and restricted to Trustees within a Natural Resource Damage Assessment.

The user is responsible for the results of any application of this data for other than its intended purpose.

These metadata may be provisional and restricted to Trustees within a Natural Resource Damage Assessment.

The user is responsible for the results of any application of this metadata for other than its intended purpose.

See Supplemental Info.

TBD

The Spatial Data Branch publishes this data on behalf of the originator. Data visually represented in ERMA are aimed to guide responders, decision makers, and users in making informed steps of analysis and action.