RI028AA1_V
Entity (ENT) | Pacific Islands Fisheries Science Center (PIFSC)GUID: gov.noaa.nmfs.inport:64203 | Updated: August 9, 2022 | Published / External
-
View As
- Full List View
- Printable Form
- EXPORTS
- InPort XML
- View in Hierarchy
Summary
Experimental veritical longline data collected on NOAA R/V Townsend Cromwell cruises.
DescriptionExperimental veritical longline data collected on NOAA R/V Townsend Cromwell cruises.
Entity Information
Entity Type
Data Table
Data Attribute / Type | Description |
---|---|
DATASET_CODE
VARCHAR2 |
Source ID Code assigned by the data entry staff. |
VERSION_CODE
VARCHAR2 |
Code for the format version assigned by the data entry staff. |
VESSEL_CODE
VARCHAR2 |
Code for the vessel. |
CRUISE_NUMBER
VARCHAR2 |
Last two digits of the year of the cruise and two-digit incremental number of the cruise for the year. |
STATION_NUMBER
VARCHAR2 |
Station number of longline operation. |
BANK_CODE
VARCHAR2 |
Seven-digit bank code. |
START_LATITUDE_DEGREES
VARCHAR2 |
Start latitude degrees, in degrees. Units for values are degrees. |
START_LATITUDE_MINUTES
VARCHAR2 |
Start latitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
START_LATITUDE_DIRECTION
VARCHAR2 |
Start latitude direction. |
START_LATITUDE_DD
NUMBER |
Computed start latitude, in decimal degrees. Positive values are North latitudes; negative values are South latitudes. Units for values are degrees. Measures are reported with a precision of 40. |
START_LONGITUDE_DEGREES
VARCHAR2 |
Start longitude degrees, in degrees. Units for values are degrees. |
START_LONGITUDE_MINUTES
VARCHAR2 |
Start longitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
START_LONGITUDE_DIRECTION
VARCHAR2 |
Start longitude direction. |
START_LONGITUDE_DD
NUMBER |
Computed start longitude, in decimal degrees. Positive values are East longitudes; negative values are West longitudes. Units for values are degrees. Measures are reported with a precision of 39. |
END_LATITUDE_DEGREES
VARCHAR2 |
End latitude degrees, in degrees. Units for values are degrees. |
END_LATITUDE_MINUTES
VARCHAR2 |
End latitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
END_LATITUDE_DIRECTION
VARCHAR2 |
End latitude direction. |
END_LATITUDE_DD
NUMBER |
Computed end latitude, in decimal degrees. Positive values are North latitudes; negative values are South latitudes. Units for values are degrees. Measures are reported with a precision of 40. |
END_LONGITUDE_DEGREES
VARCHAR2 |
End longitude degrees, in degrees. Units for values are degrees. |
END_LONGITUDE_MINUTES
VARCHAR2 |
End longitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
END_LONGITUDE_DIRECTION
VARCHAR2 |
End longitude direction. |
END_LONGITUDE_DD
NUMBER |
Computed end longitude, in decimal degrees. Positive values are East longitudes; negative values are West longitudes. Units for values are degrees. Measures are reported with a precision of 39. |
SET_YEAR
VARCHAR2 |
Set gear year. |
SET_MONTH
VARCHAR2 |
Set gear month. |
SET_DAY
VARCHAR2 |
Set gear day. |
SET_TIME
VARCHAR2 |
Set gear time. |
SET_START_DEPTH
VARCHAR2 |
Set gear start depth, in fathom. Units for values are fathoms. |
SET_END_DEPTH
VARCHAR2 |
Set gear end depth, in fathoms. Units for values are fathoms. |
HAUL_YEAR
VARCHAR2 |
Haul gear year. |
HAUL_MONTH
VARCHAR2 |
Haul gear month. |
HAUL_DAY
VARCHAR2 |
Haul gear day. |
HAUL_TIME
VARCHAR2 |
Haul gear time. |
HAUL_START_DEPTH
VARCHAR2 |
Haul gear start depth, in fathoms. Units for values are fathoms. |
HAUL_END_DEPTH
VARCHAR2 |
Haul gear end depth, in fathoms. Units for values are fathoms. |
NUMBER_DROPPERS
VARCHAR2 |
Number of dropper lines on the longline gear. |
HOOKS_PER_DROPPER
VARCHAR2 |
Number of hooks on a dropper line. |
DROPPER_SPACING
VARCHAR2 |
Distance between droppers, in fathoms. Units for values are fathoms. |
TOTAL_HOOKS
VARCHAR2 |
Total number of hooks. |
HOOK_SIZE1
VARCHAR2 |
Size of hook on the dropper. |
HOOK_SIZE2
VARCHAR2 |
Size of hook, if a second hook type used. |
HOOK_SIZE3
VARCHAR2 |
Size of hook, if a third hook type used. |
HOOK_SIZE4
VARCHAR2 |
Size of hook, if a fourth hook type used. |
BAIT_CODE
VARCHAR2 |
Code for the type of bait used. |
SURFACE_TEMPERATURE
VARCHAR2 |
Surface temperature, in tenths of a degree Celsius. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are degrees Celsius. Measures are reported with a precision of 3. |
BOTTOM_TEMPERATURE
VARCHAR2 |
Bottom temperature, in tenths of a degree Celsius. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are degrees Celsius. Measures are reported with a precision of 3. |
DROPPER_NUMBER
VARCHAR2 |
Dropper number on the longline gear. |
HOOK_NUMBER
VARCHAR2 |
Hook number on the dropper. |
HOOK_SIZE
VARCHAR2 |
Hook size of the hook number. |
FISH_NUMBER
VARCHAR2 |
Unique number assigned to each fish. |
SPECIES_CODE
VARCHAR2 |
CZM 10-digit species code. |
FORK_LENGTH
VARCHAR2 |
Fork length, in tenths of a centimeter. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are centimeters. Measures are reported with a precision of 4. |
WEIGHT
VARCHAR2 |
Weight, in hundredths of a kilogram. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are kilograms. Measures are reported with a precision of 5. |
SHARK_EATEN_CODE
VARCHAR2 |
Code for species was shark eaten. |
HOOK_LOST_CODE
VARCHAR2 |
Code if the hook was lost. |
BAIT_MISSING_CODE
VARCHAR2 |
Code if the bait was missing. |
TANGLE_CODE
VARCHAR2 |
Code if the line was tangled. |
JOB_NUMBER
VARCHAR2 |
A consecutive number assigned by the data entry staff to a block of data that is entered and verified. Format DYYNNN, where D is constant, YY is the last two digits of the year and NNN is the consecutive number that starts with 001 at the beginning of each calendar year, e.g., D85227. |
SEQUENCE_NUMBER
VARCHAR2 |
A consecutive number assigned to each record for a block of data. |
DATE_LOADED
DATE |
Date when the record was loaded into Oracle or updated. |
Child Items
No Child Items for this record.
Contact Information
No contact information is available for this record.
Please contact the owner organization (PIFSC) for inquiries on this record.
Item Identification
Title: | RI028AA1_V |
---|---|
Short Name: | RI028AA1_V |
Status: | Completed |
Abstract: |
Experimental veritical longline data collected on NOAA R/V Townsend Cromwell cruises. |
Entity Information
Entity Type: | Data Table |
---|---|
Active Version?: | Yes |
Description: |
Experimental veritical longline data collected on NOAA R/V Townsend Cromwell cruises. |
Data Attributes
Attribute Summary
Name | Type | Description | ||
---|---|---|---|---|
100
|
DATASET_CODE | VARCHAR2 | Source ID Code assigned by the data entry staff. | |
100
|
VERSION_CODE | VARCHAR2 | Code for the format version assigned by the data entry staff. | |
100
|
VESSEL_CODE | VARCHAR2 | Code for the vessel. | |
100
|
CRUISE_NUMBER | VARCHAR2 | Last two digits of the year of the cruise and two-digit incremental number of the cruise for the year. | |
100
|
STATION_NUMBER | VARCHAR2 | Station number of longline operation. | |
100
|
BANK_CODE | VARCHAR2 | Seven-digit bank code. | |
100
|
START_LATITUDE_DEGREES | VARCHAR2 | Start latitude degrees, in degrees. Units for values are degrees. | |
100
|
START_LATITUDE_MINUTES | VARCHAR2 | Start latitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. | |
100
|
START_LATITUDE_DIRECTION | VARCHAR2 | Start latitude direction. | |
100
|
START_LATITUDE_DD | NUMBER | Computed start latitude, in decimal degrees. Positive values are North latitudes; negative values are South latitudes. Units for values are degrees. Measures are reported with a precision of 40. | |
100
|
START_LONGITUDE_DEGREES | VARCHAR2 | Start longitude degrees, in degrees. Units for values are degrees. | |
100
|
START_LONGITUDE_MINUTES | VARCHAR2 | Start longitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. | |
100
|
START_LONGITUDE_DIRECTION | VARCHAR2 | Start longitude direction. | |
100
|
START_LONGITUDE_DD | NUMBER | Computed start longitude, in decimal degrees. Positive values are East longitudes; negative values are West longitudes. Units for values are degrees. Measures are reported with a precision of 39. | |
100
|
END_LATITUDE_DEGREES | VARCHAR2 | End latitude degrees, in degrees. Units for values are degrees. | |
100
|
END_LATITUDE_MINUTES | VARCHAR2 | End latitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. | |
100
|
END_LATITUDE_DIRECTION | VARCHAR2 | End latitude direction. | |
100
|
END_LATITUDE_DD | NUMBER | Computed end latitude, in decimal degrees. Positive values are North latitudes; negative values are South latitudes. Units for values are degrees. Measures are reported with a precision of 40. | |
100
|
END_LONGITUDE_DEGREES | VARCHAR2 | End longitude degrees, in degrees. Units for values are degrees. | |
100
|
END_LONGITUDE_MINUTES | VARCHAR2 | End longitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. | |
100
|
END_LONGITUDE_DIRECTION | VARCHAR2 | End longitude direction. | |
100
|
END_LONGITUDE_DD | NUMBER | Computed end longitude, in decimal degrees. Positive values are East longitudes; negative values are West longitudes. Units for values are degrees. Measures are reported with a precision of 39. | |
100
|
SET_YEAR | VARCHAR2 | Set gear year. | |
100
|
SET_MONTH | VARCHAR2 | Set gear month. | |
100
|
SET_DAY | VARCHAR2 | Set gear day. | |
100
|
SET_TIME | VARCHAR2 | Set gear time. | |
100
|
SET_START_DEPTH | VARCHAR2 | Set gear start depth, in fathom. Units for values are fathoms. | |
100
|
SET_END_DEPTH | VARCHAR2 | Set gear end depth, in fathoms. Units for values are fathoms. | |
100
|
HAUL_YEAR | VARCHAR2 | Haul gear year. | |
100
|
HAUL_MONTH | VARCHAR2 | Haul gear month. | |
100
|
HAUL_DAY | VARCHAR2 | Haul gear day. | |
100
|
HAUL_TIME | VARCHAR2 | Haul gear time. | |
100
|
HAUL_START_DEPTH | VARCHAR2 | Haul gear start depth, in fathoms. Units for values are fathoms. | |
100
|
HAUL_END_DEPTH | VARCHAR2 | Haul gear end depth, in fathoms. Units for values are fathoms. | |
100
|
NUMBER_DROPPERS | VARCHAR2 | Number of dropper lines on the longline gear. | |
100
|
HOOKS_PER_DROPPER | VARCHAR2 | Number of hooks on a dropper line. | |
100
|
DROPPER_SPACING | VARCHAR2 | Distance between droppers, in fathoms. Units for values are fathoms. | |
100
|
TOTAL_HOOKS | VARCHAR2 | Total number of hooks. | |
100
|
HOOK_SIZE1 | VARCHAR2 | Size of hook on the dropper. | |
100
|
HOOK_SIZE2 | VARCHAR2 | Size of hook, if a second hook type used. | |
100
|
HOOK_SIZE3 | VARCHAR2 | Size of hook, if a third hook type used. | |
100
|
HOOK_SIZE4 | VARCHAR2 | Size of hook, if a fourth hook type used. | |
100
|
BAIT_CODE | VARCHAR2 | Code for the type of bait used. | |
100
|
SURFACE_TEMPERATURE | VARCHAR2 | Surface temperature, in tenths of a degree Celsius. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are degrees Celsius. Measures are reported with a precision of 3. | |
100
|
BOTTOM_TEMPERATURE | VARCHAR2 | Bottom temperature, in tenths of a degree Celsius. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are degrees Celsius. Measures are reported with a precision of 3. | |
100
|
DROPPER_NUMBER | VARCHAR2 | Dropper number on the longline gear. | |
100
|
HOOK_NUMBER | VARCHAR2 | Hook number on the dropper. | |
100
|
HOOK_SIZE | VARCHAR2 | Hook size of the hook number. | |
100
|
FISH_NUMBER | VARCHAR2 | Unique number assigned to each fish. | |
100
|
SPECIES_CODE | VARCHAR2 | CZM 10-digit species code. | |
100
|
FORK_LENGTH | VARCHAR2 | Fork length, in tenths of a centimeter. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are centimeters. Measures are reported with a precision of 4. | |
100
|
WEIGHT | VARCHAR2 | Weight, in hundredths of a kilogram. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are kilograms. Measures are reported with a precision of 5. | |
100
|
SHARK_EATEN_CODE | VARCHAR2 | Code for species was shark eaten. | |
100
|
HOOK_LOST_CODE | VARCHAR2 | Code if the hook was lost. | |
100
|
BAIT_MISSING_CODE | VARCHAR2 | Code if the bait was missing. | |
100
|
TANGLE_CODE | VARCHAR2 | Code if the line was tangled. | |
100
|
JOB_NUMBER | VARCHAR2 | A consecutive number assigned by the data entry staff to a block of data that is entered and verified. Format DYYNNN, where D is constant, YY is the last two digits of the year and NNN is the consecutive number that starts with 001 at the beginning of each calendar year, e.g., D85227. | |
100
|
SEQUENCE_NUMBER | VARCHAR2 | A consecutive number assigned to each record for a block of data. | |
100
|
DATE_LOADED | DATE | Date when the record was loaded into Oracle or updated. |
Attribute Details
DATASET_CODE
Seq. Order: | 1 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 5 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Source ID Code assigned by the data entry staff. |
General Data Type: | VARCHAR2 |
VERSION_CODE
Seq. Order: | 2 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for the format version assigned by the data entry staff. |
General Data Type: | VARCHAR2 |
VESSEL_CODE
Seq. Order: | 3 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for the vessel. |
General Data Type: | VARCHAR2 |
CRUISE_NUMBER
Seq. Order: | 4 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Last two digits of the year of the cruise and two-digit incremental number of the cruise for the year. |
General Data Type: | VARCHAR2 |
STATION_NUMBER
Seq. Order: | 5 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Station number of longline operation. |
General Data Type: | VARCHAR2 |
BANK_CODE
Seq. Order: | 6 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 7 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Seven-digit bank code. |
General Data Type: | VARCHAR2 |
START_LATITUDE_DEGREES
Seq. Order: | 7 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Start latitude degrees, in degrees. Units for values are degrees. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees |
START_LATITUDE_MINUTES
Seq. Order: | 8 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
Start latitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
General Data Type: | VARCHAR2 |
Unit of Measure: | minutes |
START_LATITUDE_DIRECTION
Seq. Order: | 9 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Start latitude direction. |
General Data Type: | VARCHAR2 |
START_LATITUDE_DD
Seq. Order: | 10 |
---|---|
Data Storage Type: | NUMBER |
Max Length: | 41 |
Required: | No |
Primary Key: | No |
Scale: | 38 |
Status: | Active |
Description: |
Computed start latitude, in decimal degrees. Positive values are North latitudes; negative values are South latitudes. Units for values are degrees. Measures are reported with a precision of 40. |
General Data Type: | NUMBER |
Unit of Measure: | degrees |
START_LONGITUDE_DEGREES
Seq. Order: | 11 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Start longitude degrees, in degrees. Units for values are degrees. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees |
START_LONGITUDE_MINUTES
Seq. Order: | 12 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
Start longitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
General Data Type: | VARCHAR2 |
Unit of Measure: | minutes |
START_LONGITUDE_DIRECTION
Seq. Order: | 13 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Start longitude direction. |
General Data Type: | VARCHAR2 |
START_LONGITUDE_DD
Seq. Order: | 14 |
---|---|
Data Storage Type: | NUMBER |
Max Length: | 40 |
Required: | No |
Primary Key: | No |
Scale: | 36 |
Status: | Active |
Description: |
Computed start longitude, in decimal degrees. Positive values are East longitudes; negative values are West longitudes. Units for values are degrees. Measures are reported with a precision of 39. |
General Data Type: | NUMBER |
Unit of Measure: | degrees |
END_LATITUDE_DEGREES
Seq. Order: | 15 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
End latitude degrees, in degrees. Units for values are degrees. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees |
END_LATITUDE_MINUTES
Seq. Order: | 16 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
End latitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
General Data Type: | VARCHAR2 |
Unit of Measure: | minutes |
END_LATITUDE_DIRECTION
Seq. Order: | 17 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
End latitude direction. |
General Data Type: | VARCHAR2 |
END_LATITUDE_DD
Seq. Order: | 18 |
---|---|
Data Storage Type: | NUMBER |
Max Length: | 41 |
Required: | No |
Primary Key: | No |
Scale: | 38 |
Status: | Active |
Description: |
Computed end latitude, in decimal degrees. Positive values are North latitudes; negative values are South latitudes. Units for values are degrees. Measures are reported with a precision of 40. |
General Data Type: | NUMBER |
Unit of Measure: | degrees |
END_LONGITUDE_DEGREES
Seq. Order: | 19 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
End longitude degrees, in degrees. Units for values are degrees. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees |
END_LONGITUDE_MINUTES
Seq. Order: | 20 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
End longitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
General Data Type: | VARCHAR2 |
Unit of Measure: | minutes |
END_LONGITUDE_DIRECTION
Seq. Order: | 21 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
End longitude direction. |
General Data Type: | VARCHAR2 |
END_LONGITUDE_DD
Seq. Order: | 22 |
---|---|
Data Storage Type: | NUMBER |
Max Length: | 40 |
Required: | No |
Primary Key: | No |
Scale: | 36 |
Status: | Active |
Description: |
Computed end longitude, in decimal degrees. Positive values are East longitudes; negative values are West longitudes. Units for values are degrees. Measures are reported with a precision of 39. |
General Data Type: | NUMBER |
Unit of Measure: | degrees |
SET_YEAR
Seq. Order: | 23 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Set gear year. |
General Data Type: | VARCHAR2 |
SET_MONTH
Seq. Order: | 24 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Set gear month. |
General Data Type: | VARCHAR2 |
SET_DAY
Seq. Order: | 25 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Set gear day. |
General Data Type: | VARCHAR2 |
SET_TIME
Seq. Order: | 26 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Set gear time. |
General Data Type: | VARCHAR2 |
SET_START_DEPTH
Seq. Order: | 27 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Set gear start depth, in fathom. Units for values are fathoms. |
General Data Type: | VARCHAR2 |
Unit of Measure: | fathoms |
SET_END_DEPTH
Seq. Order: | 28 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Set gear end depth, in fathoms. Units for values are fathoms. |
General Data Type: | VARCHAR2 |
Unit of Measure: | fathoms |
HAUL_YEAR
Seq. Order: | 29 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Haul gear year. |
General Data Type: | VARCHAR2 |
HAUL_MONTH
Seq. Order: | 30 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Haul gear month. |
General Data Type: | VARCHAR2 |
HAUL_DAY
Seq. Order: | 31 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Haul gear day. |
General Data Type: | VARCHAR2 |
HAUL_TIME
Seq. Order: | 32 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Haul gear time. |
General Data Type: | VARCHAR2 |
HAUL_START_DEPTH
Seq. Order: | 33 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Haul gear start depth, in fathoms. Units for values are fathoms. |
General Data Type: | VARCHAR2 |
Unit of Measure: | fathoms |
HAUL_END_DEPTH
Seq. Order: | 34 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Haul gear end depth, in fathoms. Units for values are fathoms. |
General Data Type: | VARCHAR2 |
Unit of Measure: | fathoms |
NUMBER_DROPPERS
Seq. Order: | 35 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Number of dropper lines on the longline gear. |
General Data Type: | VARCHAR2 |
HOOKS_PER_DROPPER
Seq. Order: | 36 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Number of hooks on a dropper line. |
General Data Type: | VARCHAR2 |
DROPPER_SPACING
Seq. Order: | 37 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Distance between droppers, in fathoms. Units for values are fathoms. |
General Data Type: | VARCHAR2 |
Unit of Measure: | fathoms |
TOTAL_HOOKS
Seq. Order: | 38 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Total number of hooks. |
General Data Type: | VARCHAR2 |
HOOK_SIZE1
Seq. Order: | 39 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Size of hook on the dropper. |
General Data Type: | VARCHAR2 |
HOOK_SIZE2
Seq. Order: | 40 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Size of hook, if a second hook type used. |
General Data Type: | VARCHAR2 |
HOOK_SIZE3
Seq. Order: | 41 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Size of hook, if a third hook type used. |
General Data Type: | VARCHAR2 |
HOOK_SIZE4
Seq. Order: | 42 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Size of hook, if a fourth hook type used. |
General Data Type: | VARCHAR2 |
BAIT_CODE
Seq. Order: | 43 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for the type of bait used. |
General Data Type: | VARCHAR2 |
SURFACE_TEMPERATURE
Seq. Order: | 44 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
Surface temperature, in tenths of a degree Celsius. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are degrees Celsius. Measures are reported with a precision of 3. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees Celsius |
BOTTOM_TEMPERATURE
Seq. Order: | 45 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
Bottom temperature, in tenths of a degree Celsius. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are degrees Celsius. Measures are reported with a precision of 3. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees Celsius |
DROPPER_NUMBER
Seq. Order: | 46 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Dropper number on the longline gear. |
General Data Type: | VARCHAR2 |
HOOK_NUMBER
Seq. Order: | 47 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Hook number on the dropper. |
General Data Type: | VARCHAR2 |
HOOK_SIZE
Seq. Order: | 48 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Hook size of the hook number. |
General Data Type: | VARCHAR2 |
FISH_NUMBER
Seq. Order: | 49 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Unique number assigned to each fish. |
General Data Type: | VARCHAR2 |
SPECIES_CODE
Seq. Order: | 50 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 10 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
CZM 10-digit species code. |
General Data Type: | VARCHAR2 |
FORK_LENGTH
Seq. Order: | 51 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 5 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
Fork length, in tenths of a centimeter. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are centimeters. Measures are reported with a precision of 4. |
General Data Type: | VARCHAR2 |
Unit of Measure: | centimeters |
WEIGHT
Seq. Order: | 52 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 6 |
Required: | No |
Primary Key: | No |
Scale: | 2 |
Status: | Active |
Description: |
Weight, in hundredths of a kilogram. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are kilograms. Measures are reported with a precision of 5. |
General Data Type: | VARCHAR2 |
Unit of Measure: | kilograms |
SHARK_EATEN_CODE
Seq. Order: | 53 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for species was shark eaten. |
General Data Type: | VARCHAR2 |
HOOK_LOST_CODE
Seq. Order: | 54 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code if the hook was lost. |
General Data Type: | VARCHAR2 |
BAIT_MISSING_CODE
Seq. Order: | 55 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code if the bait was missing. |
General Data Type: | VARCHAR2 |
TANGLE_CODE
Seq. Order: | 56 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code if the line was tangled. |
General Data Type: | VARCHAR2 |
JOB_NUMBER
Seq. Order: | 57 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 6 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
A consecutive number assigned by the data entry staff to a block of data that is entered and verified. Format DYYNNN, where D is constant, YY is the last two digits of the year and NNN is the consecutive number that starts with 001 at the beginning of each calendar year, e.g., D85227. |
General Data Type: | VARCHAR2 |
SEQUENCE_NUMBER
Seq. Order: | 58 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 8 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
A consecutive number assigned to each record for a block of data. |
General Data Type: | VARCHAR2 |
DATE_LOADED
Seq. Order: | 59 |
---|---|
Data Storage Type: | DATE |
Max Length: | 22 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Date when the record was loaded into Oracle or updated. |
General Data Type: | DATE |
Catalog Details
Catalog Item ID: | 64203 |
---|---|
GUID: | gov.noaa.nmfs.inport:64203 |
Metadata Record Created By: | Brent M Miyamoto |
Metadata Record Created: | 2021-01-26 05:25+0000 |
Metadata Record Last Modified By: | SysAdmin InPortAdmin |
Metadata Record Last Modified: | 2022-08-09 17:11+0000 |
Metadata Record Published: | 2021-02-12 |
Owner Org: | PIFSC |
Metadata Publication Status: | Published Externally |
Do Not Publish?: | N |
Metadata Last Review Date: | 2021-02-12 |
Metadata Review Frequency: | 1 Year |
Metadata Next Review Date: | 2022-02-12 |