RI028AA1_V
Entity (ENT) | Pacific Islands Fisheries Science Center (PIFSC)GUID: gov.noaa.nmfs.inport:64203 | Updated: August 9, 2022 | Published / External
Item Identification
Title: | RI028AA1_V |
---|---|
Short Name: | RI028AA1_V |
Status: | Completed |
Abstract: |
Experimental veritical longline data collected on NOAA R/V Townsend Cromwell cruises. |
Entity Information
Entity Type: | Data Table |
---|---|
Active Version?: | Yes |
Description: |
Experimental veritical longline data collected on NOAA R/V Townsend Cromwell cruises. |
Data Attributes
Attribute Summary
![]() |
![]() |
Name | Type | Description |
---|---|---|---|---|
100
|
DATASET_CODE | VARCHAR2 | Source ID Code assigned by the data entry staff. | |
100
|
VERSION_CODE | VARCHAR2 | Code for the format version assigned by the data entry staff. | |
100
|
VESSEL_CODE | VARCHAR2 | Code for the vessel. | |
100
|
CRUISE_NUMBER | VARCHAR2 | Last two digits of the year of the cruise and two-digit incremental number of the cruise for the year. | |
100
|
STATION_NUMBER | VARCHAR2 | Station number of longline operation. | |
100
|
BANK_CODE | VARCHAR2 | Seven-digit bank code. | |
100
|
START_LATITUDE_DEGREES | VARCHAR2 | Start latitude degrees, in degrees. Units for values are degrees. | |
100
|
START_LATITUDE_MINUTES | VARCHAR2 | Start latitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. | |
100
|
START_LATITUDE_DIRECTION | VARCHAR2 | Start latitude direction. | |
100
|
START_LATITUDE_DD | NUMBER | Computed start latitude, in decimal degrees. Positive values are North latitudes; negative values are South latitudes. Units for values are degrees. Measures are reported with a precision of 40. | |
100
|
START_LONGITUDE_DEGREES | VARCHAR2 | Start longitude degrees, in degrees. Units for values are degrees. | |
100
|
START_LONGITUDE_MINUTES | VARCHAR2 | Start longitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. | |
100
|
START_LONGITUDE_DIRECTION | VARCHAR2 | Start longitude direction. | |
100
|
START_LONGITUDE_DD | NUMBER | Computed start longitude, in decimal degrees. Positive values are East longitudes; negative values are West longitudes. Units for values are degrees. Measures are reported with a precision of 39. | |
100
|
END_LATITUDE_DEGREES | VARCHAR2 | End latitude degrees, in degrees. Units for values are degrees. | |
100
|
END_LATITUDE_MINUTES | VARCHAR2 | End latitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. | |
100
|
END_LATITUDE_DIRECTION | VARCHAR2 | End latitude direction. | |
100
|
END_LATITUDE_DD | NUMBER | Computed end latitude, in decimal degrees. Positive values are North latitudes; negative values are South latitudes. Units for values are degrees. Measures are reported with a precision of 40. | |
100
|
END_LONGITUDE_DEGREES | VARCHAR2 | End longitude degrees, in degrees. Units for values are degrees. | |
100
|
END_LONGITUDE_MINUTES | VARCHAR2 | End longitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. | |
100
|
END_LONGITUDE_DIRECTION | VARCHAR2 | End longitude direction. | |
100
|
END_LONGITUDE_DD | NUMBER | Computed end longitude, in decimal degrees. Positive values are East longitudes; negative values are West longitudes. Units for values are degrees. Measures are reported with a precision of 39. | |
100
|
SET_YEAR | VARCHAR2 | Set gear year. | |
100
|
SET_MONTH | VARCHAR2 | Set gear month. | |
100
|
SET_DAY | VARCHAR2 | Set gear day. | |
100
|
SET_TIME | VARCHAR2 | Set gear time. | |
100
|
SET_START_DEPTH | VARCHAR2 | Set gear start depth, in fathom. Units for values are fathoms. | |
100
|
SET_END_DEPTH | VARCHAR2 | Set gear end depth, in fathoms. Units for values are fathoms. | |
100
|
HAUL_YEAR | VARCHAR2 | Haul gear year. | |
100
|
HAUL_MONTH | VARCHAR2 | Haul gear month. | |
100
|
HAUL_DAY | VARCHAR2 | Haul gear day. | |
100
|
HAUL_TIME | VARCHAR2 | Haul gear time. | |
100
|
HAUL_START_DEPTH | VARCHAR2 | Haul gear start depth, in fathoms. Units for values are fathoms. | |
100
|
HAUL_END_DEPTH | VARCHAR2 | Haul gear end depth, in fathoms. Units for values are fathoms. | |
100
|
NUMBER_DROPPERS | VARCHAR2 | Number of dropper lines on the longline gear. | |
100
|
HOOKS_PER_DROPPER | VARCHAR2 | Number of hooks on a dropper line. | |
100
|
DROPPER_SPACING | VARCHAR2 | Distance between droppers, in fathoms. Units for values are fathoms. | |
100
|
TOTAL_HOOKS | VARCHAR2 | Total number of hooks. | |
100
|
HOOK_SIZE1 | VARCHAR2 | Size of hook on the dropper. | |
100
|
HOOK_SIZE2 | VARCHAR2 | Size of hook, if a second hook type used. | |
100
|
HOOK_SIZE3 | VARCHAR2 | Size of hook, if a third hook type used. | |
100
|
HOOK_SIZE4 | VARCHAR2 | Size of hook, if a fourth hook type used. | |
100
|
BAIT_CODE | VARCHAR2 | Code for the type of bait used. | |
100
|
SURFACE_TEMPERATURE | VARCHAR2 | Surface temperature, in tenths of a degree Celsius. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are degrees Celsius. Measures are reported with a precision of 3. | |
100
|
BOTTOM_TEMPERATURE | VARCHAR2 | Bottom temperature, in tenths of a degree Celsius. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are degrees Celsius. Measures are reported with a precision of 3. | |
100
|
DROPPER_NUMBER | VARCHAR2 | Dropper number on the longline gear. | |
100
|
HOOK_NUMBER | VARCHAR2 | Hook number on the dropper. | |
100
|
HOOK_SIZE | VARCHAR2 | Hook size of the hook number. | |
100
|
FISH_NUMBER | VARCHAR2 | Unique number assigned to each fish. | |
100
|
SPECIES_CODE | VARCHAR2 | CZM 10-digit species code. | |
100
|
FORK_LENGTH | VARCHAR2 | Fork length, in tenths of a centimeter. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are centimeters. Measures are reported with a precision of 4. | |
100
|
WEIGHT | VARCHAR2 | Weight, in hundredths of a kilogram. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are kilograms. Measures are reported with a precision of 5. | |
100
|
SHARK_EATEN_CODE | VARCHAR2 | Code for species was shark eaten. | |
100
|
HOOK_LOST_CODE | VARCHAR2 | Code if the hook was lost. | |
100
|
BAIT_MISSING_CODE | VARCHAR2 | Code if the bait was missing. | |
100
|
TANGLE_CODE | VARCHAR2 | Code if the line was tangled. | |
100
|
JOB_NUMBER | VARCHAR2 | A consecutive number assigned by the data entry staff to a block of data that is entered and verified. Format DYYNNN, where D is constant, YY is the last two digits of the year and NNN is the consecutive number that starts with 001 at the beginning of each calendar year, e.g., D85227. | |
100
|
SEQUENCE_NUMBER | VARCHAR2 | A consecutive number assigned to each record for a block of data. | |
100
|
DATE_LOADED | DATE | Date when the record was loaded into Oracle or updated. |
Attribute Details
DATASET_CODE
Seq. Order: | 1 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 5 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Source ID Code assigned by the data entry staff. |
General Data Type: | VARCHAR2 |
VERSION_CODE
Seq. Order: | 2 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for the format version assigned by the data entry staff. |
General Data Type: | VARCHAR2 |
VESSEL_CODE
Seq. Order: | 3 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for the vessel. |
General Data Type: | VARCHAR2 |
CRUISE_NUMBER
Seq. Order: | 4 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Last two digits of the year of the cruise and two-digit incremental number of the cruise for the year. |
General Data Type: | VARCHAR2 |
STATION_NUMBER
Seq. Order: | 5 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Station number of longline operation. |
General Data Type: | VARCHAR2 |
BANK_CODE
Seq. Order: | 6 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 7 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Seven-digit bank code. |
General Data Type: | VARCHAR2 |
START_LATITUDE_DEGREES
Seq. Order: | 7 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Start latitude degrees, in degrees. Units for values are degrees. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees |
START_LATITUDE_MINUTES
Seq. Order: | 8 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
Start latitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
General Data Type: | VARCHAR2 |
Unit of Measure: | minutes |
START_LATITUDE_DIRECTION
Seq. Order: | 9 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Start latitude direction. |
General Data Type: | VARCHAR2 |
START_LATITUDE_DD
Seq. Order: | 10 |
---|---|
Data Storage Type: | NUMBER |
Max Length: | 41 |
Required: | No |
Primary Key: | No |
Scale: | 38 |
Status: | Active |
Description: |
Computed start latitude, in decimal degrees. Positive values are North latitudes; negative values are South latitudes. Units for values are degrees. Measures are reported with a precision of 40. |
General Data Type: | NUMBER |
Unit of Measure: | degrees |
START_LONGITUDE_DEGREES
Seq. Order: | 11 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Start longitude degrees, in degrees. Units for values are degrees. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees |
START_LONGITUDE_MINUTES
Seq. Order: | 12 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
Start longitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
General Data Type: | VARCHAR2 |
Unit of Measure: | minutes |
START_LONGITUDE_DIRECTION
Seq. Order: | 13 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Start longitude direction. |
General Data Type: | VARCHAR2 |
START_LONGITUDE_DD
Seq. Order: | 14 |
---|---|
Data Storage Type: | NUMBER |
Max Length: | 40 |
Required: | No |
Primary Key: | No |
Scale: | 36 |
Status: | Active |
Description: |
Computed start longitude, in decimal degrees. Positive values are East longitudes; negative values are West longitudes. Units for values are degrees. Measures are reported with a precision of 39. |
General Data Type: | NUMBER |
Unit of Measure: | degrees |
END_LATITUDE_DEGREES
Seq. Order: | 15 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
End latitude degrees, in degrees. Units for values are degrees. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees |
END_LATITUDE_MINUTES
Seq. Order: | 16 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
End latitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
General Data Type: | VARCHAR2 |
Unit of Measure: | minutes |
END_LATITUDE_DIRECTION
Seq. Order: | 17 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
End latitude direction. |
General Data Type: | VARCHAR2 |
END_LATITUDE_DD
Seq. Order: | 18 |
---|---|
Data Storage Type: | NUMBER |
Max Length: | 41 |
Required: | No |
Primary Key: | No |
Scale: | 38 |
Status: | Active |
Description: |
Computed end latitude, in decimal degrees. Positive values are North latitudes; negative values are South latitudes. Units for values are degrees. Measures are reported with a precision of 40. |
General Data Type: | NUMBER |
Unit of Measure: | degrees |
END_LONGITUDE_DEGREES
Seq. Order: | 19 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
End longitude degrees, in degrees. Units for values are degrees. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees |
END_LONGITUDE_MINUTES
Seq. Order: | 20 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
End longitude minutes, in tenths of a minute. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are minutes. Measures are reported with a precision of 3. |
General Data Type: | VARCHAR2 |
Unit of Measure: | minutes |
END_LONGITUDE_DIRECTION
Seq. Order: | 21 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
End longitude direction. |
General Data Type: | VARCHAR2 |
END_LONGITUDE_DD
Seq. Order: | 22 |
---|---|
Data Storage Type: | NUMBER |
Max Length: | 40 |
Required: | No |
Primary Key: | No |
Scale: | 36 |
Status: | Active |
Description: |
Computed end longitude, in decimal degrees. Positive values are East longitudes; negative values are West longitudes. Units for values are degrees. Measures are reported with a precision of 39. |
General Data Type: | NUMBER |
Unit of Measure: | degrees |
SET_YEAR
Seq. Order: | 23 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Set gear year. |
General Data Type: | VARCHAR2 |
SET_MONTH
Seq. Order: | 24 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Set gear month. |
General Data Type: | VARCHAR2 |
SET_DAY
Seq. Order: | 25 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Set gear day. |
General Data Type: | VARCHAR2 |
SET_TIME
Seq. Order: | 26 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Set gear time. |
General Data Type: | VARCHAR2 |
SET_START_DEPTH
Seq. Order: | 27 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Set gear start depth, in fathom. Units for values are fathoms. |
General Data Type: | VARCHAR2 |
Unit of Measure: | fathoms |
SET_END_DEPTH
Seq. Order: | 28 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Set gear end depth, in fathoms. Units for values are fathoms. |
General Data Type: | VARCHAR2 |
Unit of Measure: | fathoms |
HAUL_YEAR
Seq. Order: | 29 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Haul gear year. |
General Data Type: | VARCHAR2 |
HAUL_MONTH
Seq. Order: | 30 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Haul gear month. |
General Data Type: | VARCHAR2 |
HAUL_DAY
Seq. Order: | 31 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Haul gear day. |
General Data Type: | VARCHAR2 |
HAUL_TIME
Seq. Order: | 32 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Haul gear time. |
General Data Type: | VARCHAR2 |
HAUL_START_DEPTH
Seq. Order: | 33 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Haul gear start depth, in fathoms. Units for values are fathoms. |
General Data Type: | VARCHAR2 |
Unit of Measure: | fathoms |
HAUL_END_DEPTH
Seq. Order: | 34 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Haul gear end depth, in fathoms. Units for values are fathoms. |
General Data Type: | VARCHAR2 |
Unit of Measure: | fathoms |
NUMBER_DROPPERS
Seq. Order: | 35 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Number of dropper lines on the longline gear. |
General Data Type: | VARCHAR2 |
HOOKS_PER_DROPPER
Seq. Order: | 36 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Number of hooks on a dropper line. |
General Data Type: | VARCHAR2 |
DROPPER_SPACING
Seq. Order: | 37 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Distance between droppers, in fathoms. Units for values are fathoms. |
General Data Type: | VARCHAR2 |
Unit of Measure: | fathoms |
TOTAL_HOOKS
Seq. Order: | 38 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Total number of hooks. |
General Data Type: | VARCHAR2 |
HOOK_SIZE1
Seq. Order: | 39 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Size of hook on the dropper. |
General Data Type: | VARCHAR2 |
HOOK_SIZE2
Seq. Order: | 40 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Size of hook, if a second hook type used. |
General Data Type: | VARCHAR2 |
HOOK_SIZE3
Seq. Order: | 41 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Size of hook, if a third hook type used. |
General Data Type: | VARCHAR2 |
HOOK_SIZE4
Seq. Order: | 42 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Size of hook, if a fourth hook type used. |
General Data Type: | VARCHAR2 |
BAIT_CODE
Seq. Order: | 43 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for the type of bait used. |
General Data Type: | VARCHAR2 |
SURFACE_TEMPERATURE
Seq. Order: | 44 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
Surface temperature, in tenths of a degree Celsius. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are degrees Celsius. Measures are reported with a precision of 3. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees Celsius |
BOTTOM_TEMPERATURE
Seq. Order: | 45 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 4 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
Bottom temperature, in tenths of a degree Celsius. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are degrees Celsius. Measures are reported with a precision of 3. |
General Data Type: | VARCHAR2 |
Unit of Measure: | degrees Celsius |
DROPPER_NUMBER
Seq. Order: | 46 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Dropper number on the longline gear. |
General Data Type: | VARCHAR2 |
HOOK_NUMBER
Seq. Order: | 47 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 2 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Hook number on the dropper. |
General Data Type: | VARCHAR2 |
HOOK_SIZE
Seq. Order: | 48 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Hook size of the hook number. |
General Data Type: | VARCHAR2 |
FISH_NUMBER
Seq. Order: | 49 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 3 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Unique number assigned to each fish. |
General Data Type: | VARCHAR2 |
SPECIES_CODE
Seq. Order: | 50 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 10 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
CZM 10-digit species code. |
General Data Type: | VARCHAR2 |
FORK_LENGTH
Seq. Order: | 51 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 5 |
Required: | No |
Primary Key: | No |
Scale: | 1 |
Status: | Active |
Description: |
Fork length, in tenths of a centimeter. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are centimeters. Measures are reported with a precision of 4. |
General Data Type: | VARCHAR2 |
Unit of Measure: | centimeters |
WEIGHT
Seq. Order: | 52 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 6 |
Required: | No |
Primary Key: | No |
Scale: | 2 |
Status: | Active |
Description: |
Weight, in hundredths of a kilogram. During data entry, the decimal point was omitted; it has been inserted into the data. Units for values are kilograms. Measures are reported with a precision of 5. |
General Data Type: | VARCHAR2 |
Unit of Measure: | kilograms |
SHARK_EATEN_CODE
Seq. Order: | 53 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code for species was shark eaten. |
General Data Type: | VARCHAR2 |
HOOK_LOST_CODE
Seq. Order: | 54 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code if the hook was lost. |
General Data Type: | VARCHAR2 |
BAIT_MISSING_CODE
Seq. Order: | 55 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code if the bait was missing. |
General Data Type: | VARCHAR2 |
TANGLE_CODE
Seq. Order: | 56 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 1 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Code if the line was tangled. |
General Data Type: | VARCHAR2 |
JOB_NUMBER
Seq. Order: | 57 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 6 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
A consecutive number assigned by the data entry staff to a block of data that is entered and verified. Format DYYNNN, where D is constant, YY is the last two digits of the year and NNN is the consecutive number that starts with 001 at the beginning of each calendar year, e.g., D85227. |
General Data Type: | VARCHAR2 |
SEQUENCE_NUMBER
Seq. Order: | 58 |
---|---|
Data Storage Type: | VARCHAR2 |
Max Length: | 8 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
A consecutive number assigned to each record for a block of data. |
General Data Type: | VARCHAR2 |
DATE_LOADED
Seq. Order: | 59 |
---|---|
Data Storage Type: | DATE |
Max Length: | 22 |
Required: | No |
Primary Key: | No |
Status: | Active |
Description: |
Date when the record was loaded into Oracle or updated. |
General Data Type: | DATE |
Catalog Details
Catalog Item ID: | 64203 |
---|---|
GUID: | gov.noaa.nmfs.inport:64203 |
Metadata Record Created By: | Brent M Miyamoto |
Metadata Record Created: | 2021-01-26 05:25+0000 |
Metadata Record Last Modified By: | SysAdmin InPortAdmin |
Metadata Record Last Modified: | 2022-08-09 17:11+0000 |
Metadata Record Published: | 2021-02-12 |
Owner Org: | PIFSC |
Metadata Publication Status: | Published Externally |
Do Not Publish?: | N |
Metadata Last Review Date: | 2021-02-12 |
Metadata Review Frequency: | 1 Year |
Metadata Next Review Date: | 2022-02-12 |